Pioneer fitting couplers Allis 6080
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=187456
Printed Date: 03 May 2025 at 5:55pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Pioneer fitting couplers Allis 6080
Posted By: ssefick
Subject: Pioneer fitting couplers Allis 6080
Date Posted: 03 Apr 2022 at 9:57pm
Hello All!
All major oil leaks fixed, and the tractor is ready for service. Thanks everybody!!!
What size are the pioneer fittings on the rear hydraulics? I have a Century 6080 I have been running a post pounder on. The hydraulic is an iso fitting. Anyway to easily get a coupler that will work?
Thanks again!
|
Replies:
Posted By: Ron(AB)
Date Posted: 03 Apr 2022 at 11:29pm
That probably has Allis couplers...
-------------
405, 7000, 7050, 8050, 8070, L3, 2300 & 2600 disk
|
Posted By: ryan(IN)
Date Posted: 04 Apr 2022 at 5:58am
The couplers on the 6080 should take any iso coupler. Such as the Pioneer 8010 series. 8010-4 is the pipe thread version, 8010-15 is 3/4 oring, etc.
-------------
ryan
1984 8070 FWA,1979 7060,1975 7040,1971 190,1960 D-17D,1957 D-14, 196? D-19G, 1975 5040,1971? 160,1994 R62
|
Posted By: Myrastomean
Date Posted: 18 Dec 2024 at 6:59am
|
I’ve seen some oddball sizes depending on the setup. When I needed to hook up my log splitter to my tractor, I ran into a similar issue with mismatched couplers. After way too much trial and error, I ended up deciding to http://https://northernhydraulics.net/hydraulics-shop/northern-hydraulics/quick-couplers" rel="nofollow - buy quick coupler s from Northern Hydraulics. They had ISO-compatible options that worked perfectly, and the whole process of swapping attachments got way easier.If you’re running a post pounder, you’ll definitely appreciate having a solid coupler setup. Double-check the size, and once you’ve got that nailed down, the swap should be a breeze.
|
|