Print Page | Close Window

Aluminum welding,,,,?

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Shops, Barns, Varmints, and Trucks
Forum Description: anything you want to talk about except politics
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=187346
Printed Date: 31 Oct 2024 at 6:27pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Aluminum welding,,,,?
Posted By: desertjoe
Subject: Aluminum welding,,,,?
Date Posted: 29 Mar 2022 at 7:01pm

 I had been seeing them commercials on doing some aluminum welding with that special weld rod that Harbor Freight sells,,,so I thought ,,,What The Heck,,,and bought a pkg of i think,,6 rods bout 14" long. I had a Pierce 12,000 Winch that a friend had given me 2 years ago and it had one of the end plates had a chunk broke off and the other end had also  cracked. I took the pieces to 2 welders in town and they both wanted OVER $250 to repair and I figured I would try the HF rod once and if it did not work,,I would bite the bullet and have a real welder do the repairs.....Wink
 I Watched a couple of videos and biggest issue is to get the parent metal up to 725° BEFORE you apply the rod to the parent metal and let the parent metal melt the rod and use the rod to "move" the liquid aluminum as you add more aluminum to the puddle. After a couple of tries on a piece of junk aluminum,,,I took a slug of Jack Daniels and fired the torch up,,,,,LOL One of the videos had them using them small green propane bottles for heat source but I never could get it hot enough so I used my Propane/ Oxy torch ,,,,Clap I will tell you WHAT,,,,that stuff works slicker than owl chit,,I was amazed !! The literature even says you can use this rod on pot metal,,,Pot metal, even dis=similar metals,,, It really works great,,!!!Clap



Replies:
Posted By: shameless dude
Date Posted: 30 Mar 2022 at 3:14am
i'm proud of ya son!


Posted By: Scott B
Date Posted: 30 Mar 2022 at 9:21am
Now Joe, I'm a bit confused and wonderin.  Was it the welding rod or the slug of Jack Daniels that worked slicker than Owl Chit........

-------------
D17 Series 1
Allis B- 1939
Allis B- 1945


Posted By: desertjoe
Date Posted: 30 Mar 2022 at 11:11am

  Well,,Scottie,,,I couldn't rightfully say,,,,,,I tripped over an empty bottle of something when on my way into the house,,,,,,,,LOLLOL
 Actually ,,I ain't had a drink since my Cardiologist gave me two choices bout 25 years ago,,,,,,He told me "You can keep on drinkin like you do and figure on NOT makin it past 60,,,or you can throw away all them "hid-out" bottles of JD and maybe make is past more years,,,,,,, SO,,, I took those I knew of and went and buried them by the back fence,,,you know...in case they run out or someone starts a war and we need some antiseptic,,,,,,,,,,LOL,LOL

 PS,,that weld rod is best I've ever tried,,,!!!!


Posted By: LouSWPA
Date Posted: 30 Mar 2022 at 12:42pm
Joe, is it actually welding, or is it more like brazing or soldering?

-------------
I am still confident of this;
I will see the goodness of the Lord in the land of the living.
Wait for the Lord;
be strong and take heart and wait for the Lord. Ps 27


Posted By: desertjoe
Date Posted: 30 Mar 2022 at 1:14pm

 Aw Chit,,,you caught me ,,,Lou,,,,!!  You sure did,,LOL
 Naw,,I wasn't trying to fool no one,,just sometimes my mouth don't say what my brain is thinking,,,,annd my typing fingers don't pay no attention to either of them,,,,,LOLLOL
 Yes,,it is just soldering and it is the best'est I've ever seen and biggest issue is getting the parent metal hot enough (725°) If you try to melt the aluminum rod onto the weld,,and the parent metal ain't hot enough,,the rod just runs off your work and makes a mess. I went back to HF and bought another two bunches,,,you know,,,to make sure I gots some IF I need to,,,,,LOL
 Fact is,,I'ma gonna try to "weld" some pot metal,,,brochure says it will,,,!!


Posted By: LouSWPA
Date Posted: 30 Mar 2022 at 6:13pm
hey Brudder, I didn't catch ya, I was just curious.....and, uh, I get what you mean having trouble with the brain and the mouth, or brain and fingers communicating!

-------------
I am still confident of this;
I will see the goodness of the Lord in the land of the living.
Wait for the Lord;
be strong and take heart and wait for the Lord. Ps 27


Posted By: Ted J
Date Posted: 31 Mar 2022 at 3:36am
WELL,,,,,,,,,,,the brain,,,,,,,,,,,,,doesn't communicate....it only THINKS it can.  The mouth is like a fine watch,,,it runs just fine.  Now the fingers.....well we won't get into that on here,,,,,SO.....
Can you "weld" "solder" "braze" them ole lawn chairs with the stuff??
Do you HAFTA us JD with it?  Is that for a cooling effect??  Or is it a flux??  Hehehe.....


-------------
"Allis-Express"
19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17


Posted By: JW in MO
Date Posted: 31 Mar 2022 at 6:56am
That’s good to know, I’ve watched some videos by Muggy Weld but didn’t want to go through the hassle of ordering the stuff and of course the lot size is 20 times more than I want, especially if it doesn’t work.  Next time I’m in HF I’ll pick some up.

-------------
Maximum use of available resources!



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net