Farm Equipment - 7010 HI/LO/Park shift handle

Print Page | Close Window

7010 HI/LO/Park shift handle

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=186661
Printed Date: 22 Aug 2025 at 6:39am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 7010 HI/LO/Park shift handle

Posted By: farmboycitygirl
Subject: 7010 HI/LO/Park shift handle
Date Posted: 25 Feb 2022 at 10:25am

Any one know where I can get a 7010 HI/LO/Park shift handle?

Replies:

Posted By: DrAllis
Date Posted: 25 Feb 2022 at 11:08am

AGCO dealer. p/n 70262459

Posted By: Mikez
Date Posted: 25 Feb 2022 at 12:02pm

have you tried agco

Posted By: calico190xt68
Date Posted: 25 Feb 2022 at 12:27pm

I changed mine and used Bunker Hill cables. It works but I am not totally sure the adjustment capability was exactly the same as the original. I think you are safe going with Agco but they are probably more expensive.

I have a post on the forum on what I did to change it out for my Power Director in case you don't know the procedure. It can be quite frustrating and difficult. It has been recommended to change all cables out while you have the floor de-nstalled since it is such a hassle to do the hi/lo/park cable. The other ones are easier. Have fun.

-------------
80 7010, 80 7020. 67 190XTD Series I w/500 Loader, AC 2000 Plow, Member Indiana A-C Partners, Member TAC

Posted By: Joe(TX)
Date Posted: 25 Feb 2022 at 2:35pm

He needs the handle, not the cable

-------------
1970 190XT, 1973 200, 1962 D-19 Diesel, 1979 7010, 1957 WD45, 1950 WD, 1961 D17, Speed Patrol, D14, All crop 66 big bin, 180 diesel, 1970 170 diesel, FP80 forklift. Gleaner A

Posted By: Mikez
Date Posted: 25 Feb 2022 at 3:07pm

that’s the part number dr put up

Posted By: plummerscarin
Date Posted: 25 Feb 2022 at 6:14pm

Looked it up. Surprised but very pleased is still available. I have one very worn so I built up some weld on it but mat need to look into these myself

Posted By: farmboycitygirl
Date Posted: 10 Mar 2022 at 2:54pm

Thanks everyone - we got a new handle