Farm Equipment - WD headlight pigtail wire

Print Page | Close Window

WD headlight pigtail wire

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=184947
Printed Date: 19 Jul 2025 at 12:19pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WD headlight pigtail wire

Posted By: EPALLIS
Subject: WD headlight pigtail wire
Date Posted: 04 Dec 2021 at 9:24pm

My WD headlights and lenses are in fine condition except for the pigtail wire. In other words the end piece that connects to the bulb and then end of the wire. Do they make replacment pigtail wires only? If not, what are people doing just using electrical tape from end to end? Thanks in advance for any thoughts.

Replies:

Posted By: Dakota Dave
Date Posted: 05 Dec 2021 at 7:25am

Take bulb out pigtail will push out just pull wire the rest of the way out solder disk on end to new wire and feed back thru

Posted By: Alvin M
Date Posted: 05 Dec 2021 at 9:32am

I got mine at NAPA

Posted By: pirlbeck
Date Posted: 05 Dec 2021 at 10:29am

NAPA part number LS6226 is the single contact lead with the spring and 2 fiber insulating washers.

Posted By: EPALLIS
Date Posted: 05 Dec 2021 at 2:16pm

This is just the best forum that was ever created. I have to make a NAPA run next weekend. I especially appreciate the part number, that really helps. Sometimes you get a new hire who can't find anything, so this will help direct them. You are all the best! Thanks again!!

Posted By: PaulB
Date Posted: 05 Dec 2021 at 6:13pm

You can get just the little button as well as all the other parts like that from the Brillman Co. http://www.brillman.com" rel="nofollow - www.brillman.com Then use the color wire of your choice to match it with the original wiring.

-------------
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY

Posted By: Steve in NJ
Date Posted: 05 Dec 2021 at 6:27pm

If you visit our website we offer a repair circuit kit to repair the WD/WD45 Headlight pigtails. You can use our kit 1504-03A which replaces all of the Headlight circuit wiring, or we can sell you just the pigtails that go down each Headlight tube.. Your choice.

Steve@B&B

bb-customcircuits.com

-------------
39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife

Posted By: 55allis
Date Posted: 06 Dec 2021 at 9:33am

I’ve just solder them.
Normally the wire is shot and the pigtail is still good with all of them I’ve worked with.