Farm Equipment - Tach repair needed....

Tach repair needed....

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=181705
Printed Date: 20 Jul 2025 at 12:26am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Tach repair needed....

Posted By: Macon Rounds
Subject: Tach repair needed....
Date Posted: 11 Jul 2021 at 3:23pm

Looking for tach repair person...
I have several low hour D series tractors with tachs that need attention...

Who are the go to guys for this ?

Thanks in advance.

-------------
The Allis "D" Series Tractors, Gravely Walk behind Tractors, Cowboy Action Shooting !!!!!!! And Checkmate

Replies:

Posted By: Ted J
Date Posted: 11 Jul 2021 at 6:35pm

There's a guy that Bill Deppe recommended to me. 386-569-5284. Tell him that Bill Deppe sent you.

-------------
"Allis-Express"
19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17

Posted By: AC720Man
Date Posted: 11 Jul 2021 at 7:34pm

Definitely the right person to send it to. Haim Zeevi is his name, he does excellent work. He has done 2 for me this year. Star Speedometer

-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD

Posted By: Allis dave
Date Posted: 12 Jul 2021 at 7:14am

Haim does great work. We repaired my 185 tach last winter. looks and works like new and he could keep my original hours.

Posted By: SteveM C/IL
Date Posted: 12 Jul 2021 at 10:17pm

Get your pocket book out.....but the only way to get er done

Posted By: Stan R
Date Posted: 13 Jul 2021 at 5:14am

Years ago our D17 IV tach was broken. Took it apart and the spring (like the spring on a watch) was broken right at the connection point so I bent the spring into the connection point and works great. Calibrated?- Nope. But good enough.

Posted By: Leadoff
Date Posted: 13 Jul 2021 at 7:32am

Tach Comment

I have opened up two D Series tach's and been successful with getting them operating again. The hardest part is CAREFULLY opening them up with a mind to putting them back together at some point. Fortunately, after a good cleaning and little bit of WD40, and back together, ......... they are still operating

One of the Tach's had some minor discoloration on the face plate that I could not repair, just clean up a bit.

Not an ASME approved procedure but I was satisfied with the outcome

-------------
1963 D17D Series III. 1965 D15 Series II. 1965 D17 Series IV. 1975 185. 1978 716H. 1979 716H. 1965 780 Harvester/1R&DC. 1957 Model 73 SC 4 Furrow Plow

Posted By: ACinSC
Date Posted: 13 Jul 2021 at 8:24am

My 1961 D 15 has no tach/hourmeter . Far as I can tell it was an option when new . Seems kinda crazy but I guess farmers just did tractor service once a year ? Thanks !