B Fenders
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=177490
Printed Date: 08 Jun 2025 at 11:11pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: B Fenders
Posted By: BigJake
Subject: B Fenders
Date Posted: 12 Jan 2021 at 7:36pm
I pulled a set of fenders from a B and noticed that they were made from one piece of steel without the front extension spot welded to them. This type is different from the fenders that are on my other B's. Are the one piece fenders original or aftermarket? 
|
Replies:
Posted By: PaulB
Date Posted: 12 Jan 2021 at 8:07pm
|
I can't answer your question exactly, however the fender you're showing us is from a later model B. That fender has the Bullet tail light which wasn't used until about 1950 when the CA started production. Previous to that the B & C tractors had the soup can tail light mounted above the PTO. ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: BigJake
Date Posted: 12 Jan 2021 at 8:46pm
| That might answer my question Paul...they were off of a late model B. |