Construction and other equipment

Print Page | Close Window

653 roller removal

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=177489
Printed Date: 02 May 2024 at 6:13am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 653 roller removal

Posted By: earthmaster
Subject: 653 roller removal
Date Posted: 12 Jan 2021 at 7:28pm

I am attempting to replace the rollers on my 653. I have a parts machine with a good bottom. The rollers are riding in cast aluminum bosses that the bolts are frozen in. Has anyone had any luck with this program. Thanks

Replies:

Posted By: orangeman
Date Posted: 21 Apr 2021 at 11:35am

Raise machine one side at a time to expose the roller. Lots of heat on nut, quench, and appropriate sized socket with breaker bar for additional leverage -good luck.

Orangeman

Posted By: Amos
Date Posted: 21 Apr 2021 at 6:03pm

Heat red hot cool with water from a garden sprayer 3/4" impact, they come right out

Posted By: HD6GTOM
Date Posted: 11 May 2021 at 12:30am

What these guys said. I bought a "shorty" 1' drive impact wrench to get them loose. I also bought a good set of 1" impact sockets. They were a tough to get off.