6070 rear weights
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=177366
Printed Date: 21 Aug 2025 at 9:46pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 6070 rear weights
Posted By: rieg
Subject: 6070 rear weights
Date Posted: 08 Jan 2021 at 8:46am
|
What rear weights will fit a 6070 with 18.4 x 28s? I am putting new rubber on the back and would like iron. It also has a loader thus the needed weight. I would consider fluid if I can't find iron. Thanks; m rieger swoh ------------- rieg |
Replies:
Posted By: WNYBill
Date Posted: 08 Jan 2021 at 9:25am
|
Where are you finding the rubber? I can't believe the prices they get for weights and then there is the shipping. I believe I would consider casting some out of concrete.
|
Posted By: DougG
Date Posted: 08 Jan 2021 at 10:31am
| So true Bill, I paid 20 a piece at a farm sale years ago when AC was down and out, bought all they had, they were the locking 150 pounders now if you find them they want 150$$$$ |
Posted By: GreenOrange
Date Posted: 08 Jan 2021 at 12:31pm
 258887 are the ones for a 6060/6070 with 28's. I think they're about 125# each. Photo courtesy of Brian Ahart's web site: http://brianahart.net/weights.htm" rel="nofollow - http://brianahart.net/weights.htm Around here, weights have been about $1/lb. They can be found cheaper though, if you have the time to be patient.
|
Posted By: rieg
Date Posted: 09 Jan 2021 at 8:52am
|
Hey Bill found them on ebay hthomasbikes seller Advance Agritrac came out of Missouri Fedex got them in a week. They are new and maid in C**** 530.00 each. Tires look good haven't mounted them waiting to decide on fluid or iron. ------------- rieg |
Posted By: Gafry53
Date Posted: 09 Jan 2021 at 9:07am
|
How do you remove the tires on a model C ?? I need to have mine replaced.
|
Posted By: only AC orange
Date Posted: 09 Jan 2021 at 10:03am
| I have a 6060 with 460 loader - put WD, WD45, D-17 weights on it - they bolted right up! 3 sets of them on each wheel plus CCL in 18.4X28's - made a loader tractor out of it. |
Posted By: Darb210
Date Posted: 09 Jan 2021 at 2:56pm
| 258887 is correct, I have those available, $300 per pair, Im near Lima, OH 419-230-3362 A.J. |
Posted By: rieg
Date Posted: 09 Jan 2021 at 9:52pm
|
Darb I sent you a pm. Thanks guys all good info, that weight chart is awesome. I saved that for future use. Does anyone know if Richard Aken is still kicking? I saw him at the Ohio state progress show a few years ago and he was doing fine but haven't seen him on here in a while. ------------- rieg |