axle
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Shops, Barns, Varmints, and Trucks
Forum Description: anything you want to talk about except politics
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=176616
Printed Date: 28 Aug 2025 at 1:57am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: axle
Posted By: D19allisowner
Subject: axle
Date Posted: 09 Dec 2020 at 11:01am
I know this might be a long shot but dose anyone ever seen one of these before. It might be from a Plymouth. It has left hand threads on one side and they are bolts and not studs.   ------------- If you choose not to decide you still have made a choice. |
Replies:
Posted By: FloydKS
Date Posted: 09 Dec 2020 at 12:00pm
|
had a homemade trailer with that set up... ?chrysler? there should be some experts on here who know. ------------- Holding a grudge is like taking poison and expecting the other person to die |
Posted By: HD6GTOM
Date Posted: 09 Dec 2020 at 5:18pm
| In the 22+ years I owned the tire shop, I can only remember Chrysler\Dodge/Plymouth using that concoction. Don't know about foreign stuff. |
Posted By: Boss Man
Date Posted: 09 Dec 2020 at 6:32pm
| Looks similar to my Desoto |
Posted By: HudCo
Date Posted: 09 Dec 2020 at 11:23pm
| my plymouth horizon think it was a 88 was that way |
Posted By: john(MI)
Date Posted: 10 Dec 2020 at 8:49am
|
My 55 Willys I just sold was that way. The Jeep is narrower than a car or truck, so you could narrow it down with that measurement. ------------- D14, D17, 5020, 612H, CASE 446 |
Posted By: D19allisowner
Date Posted: 11 Dec 2020 at 12:15pm
|
I was thinking it was something from the thirties or forties with the nut on the end of the axle like that. ------------- If you choose not to decide you still have made a choice. |
Posted By: Coke-in-MN
Date Posted: 11 Dec 2020 at 12:22pm
|
With the drive hub being separate from the axle and a nut locking the two together it seems it would be in the 50's or before . Would say something in the Chrysler Corp family but what model would be a toss up - might measure the on center circle of lugs and then check what vehicles used that center dimension to find out more ------------- Life lesson: If you’re being chased by a lion, you’re on a horse, to the left of you is a giraffe and on the right is a unicorn, what do you do? You stop drinking and get off the carousel. |
Posted By: shameless dude
Date Posted: 11 Dec 2020 at 5:49pm
| VW had that type too |
Posted By: JohnColo
Date Posted: 11 Dec 2020 at 8:01pm
|
VW never had axles like that' just short ones from the transaxle. |
Posted By: Coke-in-MN
Date Posted: 11 Dec 2020 at 8:19pm
|
32 to 48 ford used a bolt on hub separate from axle , and up to 39 they used what was called a banjo hum with bolt patter out near the edge of brake drum . (similar to VW rim) But not many besides Chrysler corp used the left hand thread let alone bolts ------------- Life lesson: If you’re being chased by a lion, you’re on a horse, to the left of you is a giraffe and on the right is a unicorn, what do you do? You stop drinking and get off the carousel. |
Posted By: Thad in AR.
Date Posted: 12 Dec 2020 at 4:58am
| It has a removable pumpkin like a Ford. It looks like an early 9” Ford |
Posted By: jaybmiller
Date Posted: 12 Dec 2020 at 6:08am
|
gee, I gotta ask 'why' ? Odds are good it's a 'dodge family' axle but you need to totally clean it up and get a casting number, compute gear ratio and bolt pattern to narrow down when it was built.seems like a LOT of work only to find out no one wants it and at 3c/# you've lost a lot of $ ,cleaning it up... jes curious as to the 'purpose of the exercise'...... Jay ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |