Farm Equipment - WD45 lifter arm hold valve

Print Page | Close Window

WD45 lifter arm hold valve

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=176188
Printed Date: 05 May 2024 at 1:59am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WD45 lifter arm hold valve

Posted By: twinsonfarm
Subject: WD45 lifter arm hold valve
Date Posted: 22 Nov 2020 at 9:53pm

Does any one happen to know the size o rings for the lifter arm hold valve on the WD45. part number 70223580 ? Agco replaces that parts number with 70925488 which is not even close to the correct size o ring....

Replies:

Posted By: twinsonfarm
Date Posted: 23 Nov 2020 at 12:57pm

Anyone?

Posted By: DrAllis
Date Posted: 23 Nov 2020 at 1:00pm

You got it from an AGCO dealer, right??? Call them and express your problem.

Posted By: twinsonfarm
Date Posted: 23 Nov 2020 at 3:05pm

I did. AC Mccarthy out of Durand, IL. They said they were going to research the spec for the part number, that was a few days ago. I don't think a $1.10 o-ring is going to be high on their priority list. But who knows...

Posted By: DrAllis
Date Posted: 23 Nov 2020 at 3:31pm

But, my point is the Oring you got is mismarked or their subbing up to a different number isn't correct. AGCO needs to know about it so they can correct it. This info has to come from the Dealer.

Posted By: twinsonfarm
Date Posted: 23 Nov 2020 at 4:04pm

The parts guy told me that 70223580 sub to 70925488. I told him that the 488 part number does not match the 580 part number in the parts book. He knows that...