Roller tip rockers for 201, 226 allis motor
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=175574
Printed Date: 04 Nov 2025 at 12:44am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Roller tip rockers for 201, 226 allis motor
Posted By: Robacpuller
Subject: Roller tip rockers for 201, 226 allis motor
Date Posted: 29 Oct 2020 at 8:38pm
|
Aluminum roller tip rockers 1.70 ratio for 201, 226 allis motor. Can B used on tall or short head, I have a set ready to go. I can bring to waterloo pull I november. Rob 608-228-4843 Call or text $275.00 a set  
|
Replies:
Posted By: blue924.9
Date Posted: 03 Nov 2020 at 9:00pm
|
Any gains in power ------------- hi my names dan, I am a young guy. i have a problem, i prefer my tractors orange and my clutches mechanical, thanks for letting me share |
Posted By: Robacpuller
Date Posted: 03 Nov 2020 at 10:03pm
|
On a stock set up ,2 more hp. On my motor I gained 6 lbs. of cylinder pressure. But I have a 400 cube motor, with a very big cam. I didn't dyno my motor. I don't know what u have for a set up. Thanks for the interest. Rob |
Posted By: blue924.9
Date Posted: 12 Nov 2020 at 6:23pm
|
Are they bolt on ready or any prep work need done? Got a 240 inch engine with stock cam ------------- hi my names dan, I am a young guy. i have a problem, i prefer my tractors orange and my clutches mechanical, thanks for letting me share |
Posted By: Robacpuller
Date Posted: 13 Nov 2020 at 9:19pm
|
Just switch out with old, u use ur old adjusters. I need to know if u have a tall or short head. I can bring to waterloo Iowa pull next week end to save on shipping. Call or text 608 228 4843 Thanks Rob |
Posted By: Robacpuller
Date Posted: 14 Nov 2020 at 6:47pm
Pics of finished rockers  
|