Farm Equipment - Allis G

Print Page | Close Window

Allis G

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=174412
Printed Date: 18 Jul 2025 at 8:32am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Allis G

Posted By: Kiwi
Subject: Allis G
Date Posted: 15 Sep 2020 at 12:22am

Hi all just manged to pick up a Allis G engine i do not know if it is a runner but it is free i payed $270.00 is that to much. i hope to convert my G back to original at the moment it has a diesel engine.

-------------
Tractors Allis EB,two C,diesel G

Replies:

Posted By: Bob-Maine
Date Posted: 15 Sep 2020 at 7:13am

Kinda depends on condition. But it sounds like a steal to me, especially if it is complete. Bob@allisdowneast

-------------
I used to think I was indecisive, but now I'm not sure.

Posted By: JohnColo
Date Posted: 15 Sep 2020 at 2:46pm

If it runs, the engine is worth a whole lot more then $270!

Posted By: Allan Wire
Date Posted: 09 Oct 2020 at 7:42am

need to know,size of rear wheels on Allis G,thanks Allan Wire

Posted By: steve(ill)
Date Posted: 09 Oct 2020 at 8:42am

6 x 30 inches

http://www.tractordata.com/farm-tractors/000/0/0/6-allis-chalmers-g-dimensions.html" rel="nofollow - http://www.tractordata.com/farm-tractors/000/0/0/6-allis-chalmers-g-dimensions.html

-------------
Like them all, but love the "B"s.

Posted By: Allan Wire
Date Posted: 09 Oct 2020 at 4:31pm

thank you very much,any place to purchase GOOD used rim's?? need a pair,thanks again, Allan

Posted By: Kiwi
Date Posted: 10 Oct 2020 at 3:03am

Hi BKT TR135 7.2-30 is what I am running on my allis G

-------------
Tractors Allis EB,two C,diesel G

Posted By: jaybmiller
Date Posted: 10 Oct 2020 at 5:56am

My opinion...

Before you go buy new tires and tubes, solidly block it up and get her running ! Check out tranny,steering ,clutch,electrical,etc.

..hate to see you drop $400-$600 (??) in tires and tubes on a DOA(Dead On Axles) 'project'.

Also...you could patch the tubes and run on baldies while 'restoring' it..

Jay

-------------
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)

Never burn your bridges, unless you can walk on water

Posted By: Allan Wire
Date Posted: 10 Oct 2020 at 6:40am

just need RIM'S and decent tire's,for a different project,thank's to all,Allan Wire