Farm Equipment - 7060 cummins conversion

Print Page | Close Window

7060 cummins conversion

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=174363
Printed Date: 04 May 2025 at 6:01am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 7060 cummins conversion

Posted By: Dafydd7060
Subject: 7060 cummins conversion
Date Posted: 13 Sep 2020 at 4:51pm

Hi
Just wondering if anyone on here can help me
Taken the engine out of my 7060.
I noticed on the 7060 clutch there is 1 belleville washer/spring and on the conversion kit I had from usa there are 2 of these washers.
Does anyone know which way I should position these washers cos I have no idea!?
Never fitted a clutch with one of these washers before!
Any info would be much appreciated

Replies:

Posted By: MACK
Date Posted: 13 Sep 2020 at 7:25pm

The curve out on outer edge. Stands pulling edge to flywheel on outer diameter . MACK

Posted By: Dafydd7060
Date Posted: 14 Sep 2020 at 10:43am

Hi
Thanks for the answer
Would you be able to send me a simple drawing? Bit thick over here!
Thanks

Posted By: SteveM C/IL
Date Posted: 14 Sep 2020 at 12:44pm

Belleville faces away from flywheel...cup out

Posted By: Dafydd7060
Date Posted: 14 Sep 2020 at 4:01pm

Thanks for that
Do both washers face same direction?

Posted By: SteveM C/IL
Date Posted: 14 Sep 2020 at 5:52pm

Yes

Posted By: AC7060IL
Date Posted: 14 Sep 2020 at 6:26pm

Dafydd7060, which Cummins engine are you using for its conversion - 5,9L? - 8.3L?

Posted By: MACK
Date Posted: 14 Sep 2020 at 8:08pm

You will have to shim stands if you use two Belleville washers. MACK

Posted By: Dafydd7060
Date Posted: 15 Sep 2020 at 1:45am

8.3L

Posted By: Dafydd7060
Date Posted: 15 Sep 2020 at 1:51am

What do you mean by stands?
Is it the bolts with bushes that holds everything together?
Apparently, the conversion kit we bought has been recessed more to take 2 belleville washers.
Thanks

Posted By: SteveM C/IL
Date Posted: 15 Sep 2020 at 7:43pm

I would talk to your supplier about stands and shims. When I put 2 in mine had machine shop make new ones xtra length equal to thickness of extra washer.