Farm Equipment

Print Page | Close Window

videos

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=172712
Printed Date: 07 Sep 2025 at 8:26am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: videos

Posted By: hybrid
Subject: videos
Date Posted: 10 Jul 2020 at 1:58pm

anyone know of a site where there might be video that would show priming a 7040 after changing fuel filter

Replies:

Posted By: DSeries4
Date Posted: 10 Jul 2020 at 9:06pm

It would be described in the operator's manual.

-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080

Posted By: DrAllis
Date Posted: 10 Jul 2020 at 10:20pm

The primer handle can become disconnected from the pumping piston. When this happens you'll never get it primed. Spread apart the wire bail and pull the handle out. If the rubber piston isn't connected to the handle, dig it out and reattach it. Pump slowly from then on or get a new handle assembly.