Print Page | Close Window

190XT Hydraulic Fluid Change

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=171999
Printed Date: 19 Jul 2025 at 12:07am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: 190XT Hydraulic Fluid Change
Posted By: BcrazyTH
Subject: 190XT Hydraulic Fluid Change
Date Posted: 13 Jun 2020 at 11:57am
Hi all,

I am getting ready to change the hydraulic fluid and filter on my new to me 190xt SIII. I plan to drain the fluid, drop the sump and clean the screen and then put it all back together with a new filter. My question is, do I need to prime the hydraulic pump before restarting? I’ve noticed some post in other topics mention priming. Any other helpful things I should be aware of?

Thanks,



-------------
Ben (Eastern Washington)
WD45
190XT SIII



Replies:
Posted By: Joe(TX)
Date Posted: 13 Jun 2020 at 4:45pm
No need to prime the pump. There is no real way to do so. The suction tube will contain some of the old oil.

-------------
1970 190XT, 1973 200, 1962 D-19 Diesel, 1979 7010, 1957 WD45, 1950 WD, 1961 D17, Speed Patrol, D14, All crop 66 big bin, 180 diesel, 1970 170 diesel, FP80 forklift. Gleaner A


Posted By: NoslenroK
Date Posted: 13 Jun 2020 at 8:38pm
BcrazyTH>> What type of oil did ya plan to go with?


Posted By: BcrazyTH
Date Posted: 13 Jun 2020 at 9:46pm
Originally posted by NoslenroK NoslenroK wrote:

BcrazyTH>> What type of oil did ya plan to go with?

I’m going to use NAPA premium tractor hydraulic & transmission fluid, the label states it meets 821XL specs.

-------------
Ben (Eastern Washington)
WD45
190XT SIII


Posted By: BcrazyTH
Date Posted: 01 Jul 2020 at 11:15pm
Question, how much hydraulic fluid does a hydraulic fluid and filter change normally require. The book I have states the capacity is 36qts. Surely not all of this is drained right? I didn’t get 36 quarts out the tractor when I drained my fluid, or I missed a sump.

Thanks.



-------------
Ben (Eastern Washington)
WD45
190XT SIII


Posted By: DrAllis
Date Posted: 02 Jul 2020 at 7:03am
5 to 5 1/2 gallons usually gets it.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net