MAC torque wrench calibration
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Shops, Barns, Varmints, and Trucks
Forum Description: anything you want to talk about except politics
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=171210
Printed Date: 29 Apr 2025 at 8:15am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: MAC torque wrench calibration
Posted By: grinder220
Subject: MAC torque wrench calibration
Date Posted: 17 May 2020 at 4:23pm
| I have a TWZ600 torque wrench that's way out of calibration. Does anyone know how to get to the adjustment screw? I dont see a removable cap or plug on this one. |
Replies:
Posted By: DiyDave
Date Posted: 17 May 2020 at 5:43pm
I'd just set a known weight, on the end of it, and adjust to the point where it clicks, then do the math, to see how many ft-lbs it is actually reading. If its off, just take some tape, and write on it, how much its off. Otherwise, I think the tool truck dealers may be able to adjust it, on the truck, for no charge, if you have a good relationship with one, (or if you have a buddy pullin wrenches, at a place the truck stops at...) ------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |
Posted By: DMiller
Date Posted: 17 May 2020 at 6:12pm
| I own two MAC torque Wrenches, no one I have contacted can cal them anymore, DiDave is correct. |