1200 Cultivator wing lock, How?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=171080
Printed Date: 13 Oct 2025 at 10:48am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 1200 Cultivator wing lock, How?
Posted By: joepro91
Subject: 1200 Cultivator wing lock, How?
Date Posted: 13 May 2020 at 8:34am
|
Guys, how to the wings lock up for transport on my new to me 1200 field cultivator. ( it has hydraulic fold wings ). Thanks
|
Replies:
Posted By: JoeO(CMO)
Date Posted: 13 May 2020 at 8:54am
|
I used a come-a-long on mine, a chain on each wing will work. Also removed the rod end pin of the cylinder to let the wing go all the way down and rest on the main frame, but that is a pretty good "tug" to get up again. Do not let it rest on cylinder hose fittings, they will break!  ------------- |
Posted By: DrAllis
Date Posted: 13 May 2020 at 9:04am
| Depends on the age and width, but some of them had a special U-bolt with hairpin locks that was used as a safety lock. It was pretty crude and probably got lost or broken. |
Posted By: plummerscarin
Date Posted: 13 May 2020 at 9:15am
This is on a 1350. Don't know if it's the same as yours. Have to use a come along to take the pressure off the pin to remove or lock it in.
|
Posted By: Lonn
Date Posted: 13 May 2020 at 10:27am
|
My 1200 goes over center but it's only 18-1/2 feet wide. ------------- -- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... - Wink I am a Russian Bot |
Posted By: ac fleet
Date Posted: 13 May 2020 at 10:30am
|
Mine had the crosspin setup on it. VERY hard to get out and in, always had to push mine over with the loader at home ---at the other farm I had to struggle with a loadbinder to get enough slack to drive the pin out. ------------- http://machinebuildersnetwork.com/ |
Posted By: IBWD MIke
Date Posted: 14 May 2020 at 9:05am
|
I'll take a picture when I get to the farm today, if I can remember. |
Posted By: IBWD MIke
Date Posted: 14 May 2020 at 2:24pm
Here's a pic of mine. 18' 1200. |
Posted By: DrAllis
Date Posted: 14 May 2020 at 2:52pm
| BINGO !!! |
Posted By: JoeO(C-MO)
Date Posted: 15 May 2020 at 10:20am
|
Were these used on the 16 -1/2 foot also? ------------- D10 III, D15 II 3 pt, D15 II SC, 170 Gas w/shuttle, 175 Diesel UI ROPS, 185 w ROPS. AC 653 w/6 way blade, ROPS AC 615 Ind. WD45 running/Parts. |
Posted By: DrAllis
Date Posted: 15 May 2020 at 10:31am
| If it is the same age, I'd say yes. Changes were made over the years on some items and that particular design was kinda cheesey at best. |