Precleaner bowl on a 7060
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=170312
Printed Date: 05 Jul 2025 at 8:33am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Precleaner bowl on a 7060
Posted By: cdreb
Subject: Precleaner bowl on a 7060
Date Posted: 20 Apr 2020 at 6:54am
|
The precleaner bowl cracked on the 7060 I have ordered one from suppliers and they are to small. This has a 10-1/2 base and the others are to small at the base,. I am sure this is a factory install any ideas,,, ------------- B,C,5020,D17,(2)-190XT's,220,D21,7060, Agco LT70 |
Replies:
Posted By: bleeds orange
Date Posted: 20 Apr 2020 at 6:58am
|
DJS tractor parts sells that pre cleaner bowl. # AB-339D $16 Replacement number for 70651270 |
Posted By: cdreb
Date Posted: 20 Apr 2020 at 2:12pm
|
DJS does not, it is to small, he said there is only 3 sizes, so it is the size everyone has also. ------------- B,C,5020,D17,(2)-190XT's,220,D21,7060, Agco LT70 |
Posted By: Brian F(IL)
Date Posted: 20 Apr 2020 at 2:32pm
| You might try Donaldson Manufacturing. They're the ones that actually make the plastic bowls. I got one from them but had to go through one of their local dealers. |
Posted By: plummerscarin
Date Posted: 20 Apr 2020 at 3:01pm
| Got mine from Shoup |
Posted By: KJCHRIS
Date Posted: 20 Apr 2020 at 9:57pm
|
Cdreb, what is size of intake pipe pre cleaner is on? Most 7000 series have 4" inlet pipe. IF its 4" try ordering AGCO 70651270 or online from ASAP #157282 @ $16.49. Itll be 10.5" D @ top, 3" tall and inner diam of cone is 5 9/16". Fits my 200, 7000 and freinds 7050. Years back was around some on construction equip that were 5" & 6". Try heavy equip dealers for them, they're scarce. ------------- AC 200, CAH, AC185D bareback, AC 180D bareback, D17 III, WF. D17 Blackbar grill, NF. D15 SFW. Case 1175 CAH, Bobcat 543B, |
Posted By: KJCHRIS
Date Posted: 20 Apr 2020 at 10:36pm
|
The big ones weren't from Donaldson and was 30 to 45 years ago on Euclid or Wabco equip. With Detroit or Cummins industrial power. ------------- AC 200, CAH, AC185D bareback, AC 180D bareback, D17 III, WF. D17 Blackbar grill, NF. D15 SFW. Case 1175 CAH, Bobcat 543B, |
Posted By: shameless dude
Date Posted: 20 Apr 2020 at 11:03pm
| i took one off an Case/IHcombine and it fit my 7080. |
Posted By: Sherman Farms
Date Posted: 20 Apr 2020 at 11:31pm
|
Got mine from Agco. ------------- B, C, RC, 3 wc,2 wd,3 wd45, d15, d17, d19, d21, 190, 440, 7040, 918 backhoe, 12 roto balers, 7 60 combines, 40, 66,2 72,90 super, sp100, Gleaner E, F3, 3 L2, R62, and much more |
Posted By: cdreb
Date Posted: 21 Apr 2020 at 6:46am
|
I will measure it tonite, I know the base, not the top is 10-1/2" that is what is misleading when I ordered it the first time.... ------------- B,C,5020,D17,(2)-190XT's,220,D21,7060, Agco LT70 |
Posted By: injpumpEd
Date Posted: 21 Apr 2020 at 8:05am
|
That size bowl is used on may applications, from 190XT's to 4020's, to 7060's, various Case tractors, IH's etc, etc. I got mine for the 210 from my Agco dealer buddy, and it was the 70651270. I've taken the air stack off the 210 now, so the nearly new bowl got put on the 7040. ------------- 210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers! |
Posted By: steve fischer
Date Posted: 21 Apr 2020 at 8:19am
| get it from agco cheap ones turn yellow faster from sun |
Posted By: victoryallis
Date Posted: 21 Apr 2020 at 9:40am
|
Wild idea it’s an Allis call your Agco dealer ------------- 8030 and 8050MFWD, 7580, 3 6080's, 160, 7060, 175, heirloom D17, Deere 8760 |
Posted By: grinder220
Date Posted: 21 Apr 2020 at 11:58am
| I personally would replace the whole precleaner assembly with the standard one from another tractor. I have never liked the looks of those large bowls. 7060s are the only tractor I've ever seen them on also. |
Posted By: FREEDGUY
Date Posted: 21 Apr 2020 at 5:25pm
I just looked up this guys part # on the Agco Site, came up with 7026935 ?? I've not seen a # with a "706" prefix ??
|
injpumpEd wrote:Posted By: AC7060IL
Date Posted: 21 Apr 2020 at 6:12pm
| If all it’s cracked pieces are available, you might try super glueing it back together. About 5+ yrs ago I glued one of mine & it’s still good. It’s used on a regular basis too. |
Posted By: FREEDGUY
Date Posted: 21 Apr 2020 at 6:39pm
My apologies to InjectorEd , I browsed into the XT parts and sure enough, there was a "706"prefix # for the OP's bowl  . No disrespect intended  . I just had never run across the 706 prefix until tonight  . Does anyone have a reason for the 702/706 part # variation ??
|
Posted By: grinder220
Date Posted: 21 Apr 2020 at 6:59pm
 this should be what he has. Its larger than most models 190XT,220,7030,7050 ECT.
|
Posted By: cdreb
Date Posted: 22 Apr 2020 at 6:47am
|
That's it, in the pic, I did measure it on the intake tube it is 4". I called the Masseys dealership to order one I hope it is right. Thanks for the help guys, mine is beyond repair, I really didn't want to change it out, with the hassle of chasing down parts,, ------------- B,C,5020,D17,(2)-190XT's,220,D21,7060, Agco LT70 |