HD 5 steering clutch
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=168035
Printed Date: 19 May 2025 at 12:46pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: HD 5 steering clutch
Posted By: Dave H (NE)
Subject: HD 5 steering clutch
Date Posted: 04 Feb 2020 at 3:18pm
|
Have all bolts out of the clutch on each side and the pins out of the brake band. Book says to lift out assembly, but can't get it to move. clutch was full of a mouse nest and would not release. Any thing I am missing? Ideas? |
Replies:
Posted By: gemdozer
Date Posted: 04 Feb 2020 at 3:25pm
| The stering cluch flanges have a lip on and you need 1/8 inch each side from the brake drum |
Posted By: DMiller
Date Posted: 04 Feb 2020 at 4:01pm
| They 'Should' Slide away from the clutch pack on splines, might need a little coercion. |
Posted By: Dave H (NE)
Date Posted: 04 Feb 2020 at 5:47pm
|
1/8 on each side is what I was thinking. But will not move, need some heavy duty coercion I guess. |
Posted By: DiyDave
Date Posted: 04 Feb 2020 at 5:58pm
Ah, mouse piss, nature's gorilla glue... ------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |
Posted By: LeonR2013
Date Posted: 06 Feb 2020 at 9:26pm
| Call Tom. LOL Leon |
Posted By: gemdozer
Date Posted: 07 Feb 2020 at 5:06am
| If you could leaved the stering cluch lever engaged with pression and knocking on side flange it't could help |