Rear wheel assist gleaner
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=165476
Printed Date: 03 Dec 2025 at 2:53pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Rear wheel assist gleaner
Posted By: fastallis
Subject: Rear wheel assist gleaner
Date Posted: 01 Nov 2019 at 11:47am
Which way do you have to have the dimple on the hub in or out for the hubs to be engaged to the motor? The dimple on my m3 are in, is this correct?
|
Replies:
Posted By: farmboy520
Date Posted: 01 Nov 2019 at 1:30pm
|
I thought on hubs like that, you had the dimple out. ------------- On the farm: Agco Allis 9695, 7060, 7010, R66, Farmall H, and Farmall F20 (Great Grandpa's) |
Posted By: wekracer
Date Posted: 01 Nov 2019 at 3:00pm
| I believe dimple out is unlocked. I’ll look at mine tonight |
Posted By: Daehler
Date Posted: 01 Nov 2019 at 7:13pm
|
Dimple is out on my R7. Should be engaged. Pushing in will disengage. Thats how a gilcrest is but it works a little different. Book says to keep engaged except when towing. ------------- 8070FWA,7080 BlackBelly, 7045,2 200s,D19,D17,G, WD,45,UC,7 AC mowers and lots more! "IT TAKES 3 JD's TO OUT DO AN ALLIS, 2 TO MATCH IT IN THE FIELD AND 1 FOR PARTS!" |
Posted By: fastallis
Date Posted: 01 Nov 2019 at 7:38pm
| Thanks. |
Posted By: MACK
Date Posted: 01 Nov 2019 at 8:54pm
| Dimple out is engaged. MACK |