210 puller plowing on you tube
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=161218
Printed Date: 27 Apr 2024 at 8:46am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 210 puller plowing on you tube
Posted By: Kevin210
Subject: 210 puller plowing on you tube
Date Posted: 21 May 2019 at 10:23pm
Would anyone happen to know who's tractor it is on you tube posted by
dragined.
|
Replies:
Posted By: injpumpEd
Date Posted: 22 May 2019 at 8:32am
That would be me!
-------------
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
Posted By: Lonn
Date Posted: 22 May 2019 at 8:39am
|
Here the link
https://youtu.be/raOmU7AJz0k" rel="nofollow - https://youtu.be/raOmU7AJz0k
-------------
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot
|
Posted By: Sugarmaker
Date Posted: 22 May 2019 at 8:42am
|
Ed, Very nice video! Awesome tractor! I need to roll over some earth! Regards, Chris
-------------
D17 1958 (NFE), WD45 1954 (NFE), WD 1952 (NFE), WD 1950 (WFE), Allis F-40 forklift, Allis CA, Allis D14, Ford Jubilee, Many IH Cub Cadets, 32 Ford Dump, 65 Comet.
|
Posted By: injpumpEd
Date Posted: 22 May 2019 at 10:27am
That was a long time ago. It's evolved a lot since then lol!
-------------
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
Posted By: JohnCO
Date Posted: 22 May 2019 at 11:28am
Ed, Where were you plowing?
-------------
"If at first you don't succeed, get a bigger hammer"
Allis Express participant
|
Posted By: injpumpEd
Date Posted: 22 May 2019 at 12:24pm
That particular video was outside of Mendota IL on my friends farm.
-------------
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
Posted By: AC720Man
Date Posted: 22 May 2019 at 6:56pm
Ed, 5 more bottoms on that plow and it may have made her grunt some. Lol, sweet 210 you got.
-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
Posted By: Kevin210
Date Posted: 22 May 2019 at 8:53pm
|
So is that MK II 3700 engine in that 210 and if so how did you deal with the water pump and radiator being on opposite sides.
|
Posted By: injpumpEd
Date Posted: 23 May 2019 at 7:20am
Back then it was still the original engine, and I did some cobbling to get water to the innercooler. It has now been switched to a later style block from an N6. I put the 210 water volute and pump on to fit the radiator. To connect the oil cooler water pipe, I cut the 2 different style water pipes in the middle, and connect it with a 2" long piece of straight hose and 4 clamps. Going to the later block allowed me more room to put an A pump on it, since that what our too hot to farm class allows. In this video, it was still a Roosa .450 pump, 4 X .024" injectors, S300 turbo, and a stroked to 5.5" crank for 468 CID. Power wise it played with that 5 bottom, but pulling tires aren't good field tires, and it would just spin if it had any more bottoms. This farm it worked really nice. 2 weeks before this vid, we plowed at the Bergeson farm south of Seneca, and that ground was much harder pulling.
-------------
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
Posted By: exSW
Date Posted: 23 May 2019 at 8:18am
|
Is the stroked crank still AC or did you use q 466 crank?
|
Posted By: injpumpEd
Date Posted: 23 May 2019 at 9:18am
AC crank welded and offset ground.
-------------
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
Posted By: AC7060IL
Date Posted: 23 May 2019 at 11:19am
Ed, thanks for your AC 210 plowing video.
So it sounds like your N6’s stroked 426 (468) engine is comparable to a better smaller block version of an AC 516 (4.4375”x5.5625”)? Any idea what your 468 has for hp?
|
Posted By: injpumpEd
Date Posted: 23 May 2019 at 12:33pm
200hp!
-------------
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
Posted By: Allisplumber
Date Posted: 23 May 2019 at 1:05pm
|
I think you forgot about the 1 in front of that 200 !
|
Posted By: injpumpEd
Date Posted: 23 May 2019 at 3:06pm
long ways from 1200. Was around 400 at the time this vid was done back in 2010. It's over 600 now, but needs to be 750! maybe this year's tweaks will get it there!
-------------
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
Posted By: exSW
Date Posted: 23 May 2019 at 3:15pm
|
https://m.youtube.com/watch?v=TJJ1ZdN22NQ" rel="nofollow - https://m.youtube.com/watch?v=TJJ1ZdN22NQ I think this one is more impressive same tractor I believe.
|
Posted By: injpumpEd
Date Posted: 23 May 2019 at 3:31pm
That was even before we plowed with it. That was a lot of fun pulling equipment with a hot pulling tractor lol! I've forgotten about all those old vids we did. So much easier to load to FB now.
-------------
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
|