Need help with D10 rims
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=160697
Printed Date: 15 Apr 2026 at 11:19am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Need help with D10 rims
Posted By: MDWilliams338
Subject: Need help with D10 rims
Date Posted: 05 May 2019 at 6:57pm
Can you good people help me with these D10 rim as to where I may find any if any such animal still exists because I sure can’t seem to find any with these square bolt hoops? I guess if it comes to it I can just buy two with the round hoops or go to power adjust rims. ------------- ‘42B,’45B,’48C,’51CA,’52CA,’69170,1935WC,1936WC,WD,WD Highcrop,WD45,WF,D10/14/15/17/19 It isn’t how you die.It’s what you live for.-Daniel Boone |
Replies:
Posted By: Gary Burnett
Date Posted: 05 May 2019 at 8:14pm
|
I have a set on a parts D10 with 12.4 X 24 tires on them. |
Posted By: DiyDave
Date Posted: 05 May 2019 at 8:24pm
The dirty little secret is is that most non PA 24" rims and centers will work, to get you going. My D-10 is on farmall 140 centers, with british leyland rims. I had to use a plasma cutter, to remove about 1/8", from the outside center to rim bolt holes, to get the bolts to go through the metric rims, but it wasn't much work... ------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |
Posted By: Ranse
Date Posted: 05 May 2019 at 9:34pm
140 Farmalls have nine inch rims that look just like that if you need both. They are pretty common and fairly easy to find. My D-10 had 10 inch rims like that, and I only needed one. So I had to find a match, after three years I finally did. The rims are made by Firestone not AC. You can see Firestone stamped in mine Can your rims not be saved? It don't look to bad. |
Posted By: MDWilliams338
Date Posted: 05 May 2019 at 9:53pm
That’s what I have on this one is 10’s.One of them isn’t too bad but the other has a nasty hole at the valve stem.I could add sheet metal and fix it But was hoping to find another one...didn’t realize these 10’s were a little hard to find. ------------- ‘42B,’45B,’48C,’51CA,’52CA,’69170,1935WC,1936WC,WD,WD Highcrop,WD45,WF,D10/14/15/17/19 It isn’t how you die.It’s what you live for.-Daniel Boone |
Ranse wrote:Posted By: MDWilliams338
Date Posted: 06 May 2019 at 11:52am
Mr Burnett...I sent you a pm about the ones you have. ------------- ‘42B,’45B,’48C,’51CA,’52CA,’69170,1935WC,1936WC,WD,WD Highcrop,WD45,WF,D10/14/15/17/19 It isn’t how you die.It’s what you live for.-Daniel Boone |