parking brake 190
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=160680
Printed Date: 15 Apr 2026 at 11:19am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: parking brake 190
Posted By: tractorman
Subject: parking brake 190
Date Posted: 05 May 2019 at 10:57am
any body ever fix a non locking parking brake on a 190 ? HOW'd you do it ?
-------------
Play on 38 B 49 WF , working on D14, D15 B10, Bee 12 B110. use 185 and 190
|
Replies:
Posted By: Joe(TX)
Date Posted: 05 May 2019 at 11:54am
If the brake lock does not work, it usually need to be freed up and lubricated. It also won't work if the spring is missing.
-------------
1970 190XT, 1973 200, 1962 D-19 Diesel, 1979 7010, 1957 WD45, 1950 WD, 1961 D17, Speed Patrol, D14, All crop 66 big bin, 180 diesel, 1970 170 diesel, FP80 forklift. Gleaner A
|
Posted By: DougG
Date Posted: 05 May 2019 at 1:29pm
|
Its a interesting setup, the spring plays a big part of it , if it jumps out of lock the brake pawls need replaced
|
Posted By: DanWi
Date Posted: 06 May 2019 at 3:10pm
|
You can fix them sometimes by taking the piece off the end of the arm that locks into the teeth and putting a new edge on it with a grinder. Also sometimes they need the roll pin thru the handle on the shaft replaced.
|
Posted By: DrAllis
Date Posted: 06 May 2019 at 5:19pm
|
New ratchet teeth and a new pawl and a good spring and lube on the pivot area, they work great. I saw one pawl installed BACKWARDS one time by someone who didn't know what they were doing. The same mistake could be done with the ratchets....they only work one way.
|
Posted By: FREEDGUY
Date Posted: 06 May 2019 at 6:35pm
|
Be thankful it's a 190, our 180 park brake set-up leaves ALOT to be desired. That engineer needed to be strung up IMO. What was wrong with the D series "clam" looking wedge system??
|
|