Farm Equipment - Webbing between sheet metal

Print Page | Close Window

Webbing between sheet metal

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=160631
Printed Date: 15 Apr 2026 at 11:19am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Webbing between sheet metal

Posted By: Tgtack
Subject: Webbing between sheet metal
Date Posted: 03 May 2019 at 6:11pm

On several parts sites I have seen several widths of webbing to go between parts. My question is whether webbing was used between the sheet metal joints on a model B. In particular, between fuel tank, the hood, and the hold down strap that runs across the hood.

-------------
1939 AC Model B, 1952 AC Model G, Case 195, numerous Wheel Horse, Hit Miss Engines, currently looking for a AC B10 garden tractor

Replies:

Posted By: Hubert (Ga)engine7
Date Posted: 03 May 2019 at 10:23pm

My B has it between the hood and the fuel tank and between the strap and the hood and I believe some under the tank also. Anywhere you have the possibility of movement between metal parts is a good place for the webbing. I picked up some cork material to use in place of the fabric webbing. It has worked just as good and it was free.

-------------
Just an old country boy saved by the grace of God.

Posted By: oldways
Date Posted: 03 May 2019 at 10:57pm

I bought a 1.5 inch wide by 25 yard long roll of it on Amazon for 12.99 on Amazon.

-------------
1 Corinthians 1:18 1969-190xt-III. 1966 190xt gas. 1966 190xt Cab. 1948-G. 1937-WC unstyled. 1950-B. 1951-CA. 1966-D17-IV