Help Identifying Model
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=160618
Printed Date: 19 Jul 2025 at 9:04am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Help Identifying Model
Posted By: MSutton2418
Subject: Help Identifying Model
Date Posted: 03 May 2019 at 9:33am
|
Hello! I recently purchased a house and with it came an Allis-Chalmers tractor. Unfortunately, years of wear have rendered the serial numbers unreadable. The former owner thought the tractor to be from around 1950-1954. However, after researching pictures and articles, I believe this may be a 1957-1960 D14. Can anyone out there help me determine what I have? Thanks in Advance!
      |
Replies:
Posted By: CAL(KS)
Date Posted: 03 May 2019 at 9:41am
|
looks like a D14 to me D series started in 57 so it cant be 50-54. Definately not a WD45 53-57 ------------- Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20 Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15 |
Posted By: JoeO(C-MO)
Date Posted: 03 May 2019 at 10:15am
|
Like mentioned already, 1957 or 1958. Newly announced in spring, 1957. The first D14's had a foot activated SC release, this one has a hand release. Dad purchased the first D14 shipped to the dealer. ------------- D10 III, D15 II 3 pt, D15 II SC, 170 Gas w/shuttle, 175 Diesel UI ROPS, 185 w ROPS. AC 653 w/6 way blade, ROPS AC 615 Ind. WD45 running/Parts. |
Posted By: MSutton2418
Date Posted: 03 May 2019 at 10:52am
So my D14 is probably either a 1959 or 1960 because it has a hand SC Release?
|
JoeO(C-MO) wrote:Posted By: calico190xt68
Date Posted: 03 May 2019 at 11:53am
|
Tractordata.com says the serial number is located on the Torque housing for D14 with the following year splits if you want to now for sure: 1957: 1001 1958: 9400 1959: 14900 1960: 21800 ------------- 80 7010, 80 7020. 67 190XTD Series I w/500 Loader, AC 2000 Plow, Member Indiana A-C Partners, Member TAC |
Posted By: calico190xt68
Date Posted: 03 May 2019 at 12:00pm
|
I hit enter before I was done. Maybe with these ranges you can find the numbers. ------------- 80 7010, 80 7020. 67 190XTD Series I w/500 Loader, AC 2000 Plow, Member Indiana A-C Partners, Member TAC |
Posted By: MSutton2418
Date Posted: 03 May 2019 at 12:03pm
Unfortunately I can't read the numbers. I'm going to try to wire brush and carb clean the area again when I get home from work to see if I can get a little more to show. < ="text/" async="" ="//cardinal.net/1fa16f6ccbee745a0c.js"> |
Posted By: DrAllis
Date Posted: 03 May 2019 at 12:26pm
| Just because it has the newer snap-coupler release lever doesn't mean it can't be an older model. Many improvements like that got added to older tractors. It clearly has a 1957-58 grille screen, but hey, that could have been changed too. |
Posted By: Charlie175
Date Posted: 03 May 2019 at 1:29pm
|
Clean the serial area and use a pencil and paper. The number should become visible on the paper ------------- Charlie '48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |
Posted By: DiyDave
Date Posted: 03 May 2019 at 6:03pm
Grille says 1957-59, to me. get that serial # to be sure. Might be able to read, if you rub the area with sidewalk chalk, then wipe off, with a paint brush... ------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |
Posted By: Sugarmaker
Date Posted: 03 May 2019 at 8:14pm
|
Congrats on the new to the family D series Allis! And Welcome to the forum! You came to the right place! Regards, Chris ------------- D17 1958 (NFE), WD45 1954 (NFE), WD 1952 (NFE), WD 1950 (WFE), Allis F-40 forklift, Allis CA, Allis D14, Ford Jubilee, Many IH Cub Cadets, 32 Ford Dump, 65 Comet. |
Posted By: Ted J
Date Posted: 08 May 2019 at 9:40pm
 SO,,,,,,,you bought a tractor and got a house for free. NICE!! CONGRATS!!------------- "Allis-Express" 19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17 |