New Toy
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=160546
Printed Date: 10 Oct 2025 at 7:01am Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: New Toy
Posted By: Ranse
Subject: New Toy
Date Posted: 30 Apr 2019 at 8:43pm
I'm just like a little kid. I had to get my new toy out and play with it, and show it off a little too. I got this new four basket tedder. It's an Enorossi brand. Vortex is the tedder line. I got tired of the little two basket, it took forever to get over a field. I try not to tedder hay that much, usually only when it gets wet. I may have to tedder more this year just for fun. I been going around the pasture scattering hay the cows didn't clean up. It sure runs smooth, I'm used to a machine rattling, clanking, and sounding like it's going to fall a part.
I have a video if it works. I must warn you, it's almost four minutes long, so it gets a little monotonous. The quality is pretty bad too. It was done with a camcorder and re-recorded with a phone so I could download it.
https://www.youtube.com/watch?v=88cRps808xM" rel="nofollow - https://www.youtube.com/watch?v=88cRps808xM
|
Replies:
Posted By: Ranse
Date Posted: 30 Apr 2019 at 8:55pm
Here is a few pics. You evidently can't post pictures and videos in the same box. I found that out the hard way.



|
Posted By: exSW
Date Posted: 30 Apr 2019 at 9:04pm
Posted By: Tenn allis
Date Posted: 01 May 2019 at 5:27am
Good looking tedder Ranse now your a you tuber
|
Posted By: Hubert (Ga)engine7
Date Posted: 01 May 2019 at 5:51am
Nice unit! Have fun!
------------- Just an old country boy saved by the grace of God.
|
Posted By: allisrutledge
Date Posted: 01 May 2019 at 6:26am
Better check them gearboxes. Some send with no oil
------------- Allis Chalmers still exist in my mind and barns
|
Posted By: ac hunter
Date Posted: 01 May 2019 at 6:56am
Hope that new tedder speeds up your hay making. Just be careful around that thing and turn it off before you get off the tractor. Several years ago a fellow I grew up with at church and a fraternity brother got wound up in one of those and was killed. No one around and no idea what he was doing around it. I know we have all been around running machinery and know better.
|
Posted By: Tim NH
Date Posted: 01 May 2019 at 6:32pm
Ranse, that tedder looks like a nice one. Is that the little Allis you brought to the GOTO last spring. Tim
------------- 1950 WD 1959 D14 1955 WD45 1976 7000 B 207
|
Posted By: Ranse
Date Posted: 01 May 2019 at 8:31pm
Tim NH wrote:
Ranse, that tedder looks like a nice one. Is that the little Allis you brought to the GOTO last spring. Tim |
Yes Tim it's the same one. I only have the two, and the B is running like crap now. The little D-10 raised those wings really well I thought. It would handle that tedder no problem. The D-10 is a little slow, so I will most likely run it behind one of my larger tractors, unless I get in a pinch.
Scott, good point on the gearbox oil. I meant to check that. I guess I got a little bit antsy.
|
Posted By: AC720Man
Date Posted: 02 May 2019 at 8:57pm
Same one we bought 2 years ago, it does a great job. Can’t wait to use it again in 2 weeks if Mother Nature cooperates
------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD
|
|