Plow
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=160445
Printed Date: 15 Apr 2026 at 8:04am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Plow
Posted By: IBWD MIke
Subject: Plow
Date Posted: 28 Apr 2019 at 9:34am
|
I must have a plow addiction! Went to the local consignment auction Saturday. Found this 2 bottom snap coupler specimen. You don't find them this nice very often so it 'had' to come home with me. Beaming screw is free, not sure about the other adjustments. Shares and moldboard are in great shape. Need to polish the bottoms a little before I put it in the dirt. I know the previous owner, think he was happy with the price, was standing next to him when it sold. He also sold a WD, pretty nice tractor. It only brought $500, just don't need another. This could knock a couple of steps off of my plowing with the CA dream.
 
|
Replies:
Posted By: bleeds orange
Date Posted: 28 Apr 2019 at 9:54am
| Better than some moron scrapping them. Nice buy |
Posted By: Sugarmaker
Date Posted: 28 Apr 2019 at 10:16am
|
Mike, Good looking plow! Congrats! Regards, Chris ------------- D17 1958 (NFE), WD45 1954 (NFE), WD 1952 (NFE), WD 1950 (WFE), Allis F-40 forklift, Allis CA, Allis D14, Ford Jubilee, Many IH Cub Cadets, 32 Ford Dump, 65 Comet, 66 F100. |
Posted By: Dusty MI
Date Posted: 28 Apr 2019 at 11:34am
|
I'd like to find a 2 bottom 3 point for my D-10 series III. ------------- 917 H, '48 G, '65 D-10 series III "Allis Express" |
Posted By: Ted J
Date Posted: 28 Apr 2019 at 11:47am
 You did good Mike!! 
------------- "Allis-Express" 19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17 |
Posted By: IBWD MIke
Date Posted: 28 Apr 2019 at 9:41pm
|
So a little more about this. Measured today, it's a 2-14. Even though the weather was crappy I had a great AC weekend. Getting the plow was great but I also got a set of duals from HD6GTom and got the tour of his AC stuff. Sunday I worked on some other orange projects. Got the overheating WD buttoned up. Then worked on my 3-16 model 63 (I think) plow. Have had this one for several years, had a bent pull bar. Parts from three plows should get this one going. Here's a shot as the reassembly just beginning.
 |
Posted By: IBWD MIke
Date Posted: 28 Apr 2019 at 9:45pm
More reassembly. |
Posted By: IBWD MIke
Date Posted: 28 Apr 2019 at 9:47pm
|
Posted By: IBWD MIke
Date Posted: 28 Apr 2019 at 9:49pm
Coulters, left them off until I can get the bottoms polished up a bit. |
Posted By: IBWD MIke
Date Posted: 28 Apr 2019 at 9:51pm
Put the CA on the trailer to go see the doc and get the battery charging problem resolved. |
Posted By: Dave(inMA)
Date Posted: 29 Apr 2019 at 6:22am
Mike - nice plows! I've got a 3-bottom like yours sitting mostly in pieces. Maybe this will inspire me to get it back together. Plan is to pull it with the WD45. Now you just need another CA - or figure out how to plow with that mower slung under the one you have.  ------------- WC, CA, D14, WD45 |
Posted By: IBWD MIke
Date Posted: 29 Apr 2019 at 12:48pm
|
Dave, I have a line on another CA. Just need to get done planting, and the owner the same. It's going to need some love so the one I have now will probably have to mow all year. Made an appointment at the electrical shop to get the charging fixed today. May get the new manifold and muffler on before long too! Worked om removing whats left of the rim after you cut the rail out today. Got two done, only 6 to go! I'm really enjoying working on some of my 'long term projects'. The last two years were so hectic not much got done on them. |
Posted By: Dave(inMA)
Date Posted: 29 Apr 2019 at 4:18pm
|
Sounds like major progress, Mike. Bringing them back to life is half the fun....putting them to work is the rest. ------------- WC, CA, D14, WD45 |
Posted By: IBWD MIke
Date Posted: 30 Apr 2019 at 10:08am
|
Phone pic from earlier this spring. Well, that didn't work, will have to try again later.  |
Posted By: HD6GTOM
Date Posted: 30 Apr 2019 at 4:15pm
| Thank you for getting here and picking up the duals. It was appreciated. |
Posted By: IBWD MIke
Date Posted: 01 May 2019 at 9:10am
|
No problem Tom, enjoyed the visit. |