Print Page | Close Window

2300 disc

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=157260
Printed Date: 24 Aug 2025 at 4:10am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: 2300 disc
Posted By: allisrutledge
Subject: 2300 disc
Date Posted: 15 Jan 2019 at 11:17am
Has anyone added Hyd cylinders to their manual wings? I like the disc but my back and shoulders don't. It is 16 ft and most places I farm is small acreage. Roads are narrow and most barns are 12 ft hallways with about 11 ft clearances and short doors and I can keep it in the dry. Just want to know if anyone has done this and can it still fold flat?

-------------
Allis Chalmers still exist in my mind and barns



Replies:
Posted By: Mike Kroupa
Date Posted: 15 Jan 2019 at 12:27pm
My Dad had them on the 2300 disc he purchased new in 1974. They did not fold completely flat, but if I recall the difference in transport width was negligible. Mike


Posted By: Charlie175
Date Posted: 15 Jan 2019 at 12:48pm
On our small roads the disk is huge! I about clip mailboxes with it...

-------------
Charlie

'48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD


Posted By: allisrutledge
Date Posted: 15 Jan 2019 at 12:59pm
I've put up a few mailboxes before. 14 ft offset behind a pickup will get them. I like the looks of a 1010 kewanee? One close I need to go look at. Do they work ok?

-------------
Allis Chalmers still exist in my mind and barns


Posted By: Ron(AB)
Date Posted: 15 Jan 2019 at 1:53pm
I've got an 18 ft with hyd wings (2300 model) for sale...it would be a lot easier than trying to retro fit yours...lol. I realize the drive might be a bit far though...


Posted By: AC7060IL
Date Posted: 15 Jan 2019 at 2:05pm
Heres a link to look at one with hydraulic fold wings. Not mine.
https://www.auctiontime.com/listings/farm-equipment/auction-results/23664297/allis-chalmers-2300" rel="nofollow - https://www.auctiontime.com/listings/farm-equipment/auction-results/23664297/allis-chalmers-2300


Posted By: tbran
Date Posted: 16 Jan 2019 at 12:01am
Yes, a 16' hyd fold is about 14' folded up.... wings just tilt up just over 90 degrees.

-------------
When told "it's not the money,it's the principle", remember, it's always the money..



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net