Anyone running a Steiger
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=156525
Printed Date: 29 May 2025 at 1:18am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Anyone running a Steiger
Posted By: wekracer
Subject: Anyone running a Steiger
Date Posted: 19 Dec 2018 at 5:08pm
| We have been taking about a 300 horse tractor. The steigers have a good reputation and seem reasonable priced. Just wondering how the cabs are. Are they loud? |
Replies:
Posted By: HD6GTOM
Date Posted: 19 Dec 2018 at 6:25pm
| The older ones were. |
Posted By: ToddnwIl
Date Posted: 19 Dec 2018 at 6:31pm
| What years are you thinking? We are farming with a 9370 and a 9230. Love the cabs and ease of maintenance. |
Posted By: ToddnwIl
Date Posted: 19 Dec 2018 at 6:48pm
 
|
Posted By: Dakota Dave
Date Posted: 19 Dec 2018 at 7:42pm
| Farm I work at has a 9270 very big comfortable cab. Has the 4 range 3 speed synchro shift. I like it a lot it's a little overpowered it'll spin out instead of lugging down. All the hydraulic controls are convenient and has nice steering control. We pull a 40 ft heavy culture harrow with a 60 ft leveling harrow hooked behind it. Only thing that has ever stopped me was a 32 shank chisel plow. The lift actuator broke when I was going up high in frozen ground. Fuel tank holds about 250 gallons but I dig a few quarters before I need fuel again. |
Posted By: Adam Stratton
Date Posted: 19 Dec 2018 at 9:12pm
| We run 2 late 70s Steigers and really like them. One has an 855 cummins and a 10 speed and the other has a 3406 cat and 20 speed. Ours arent big on creature comforts (the ac isnt worth much on either) but they are pretty easy to work on and have been pretty reliable for us. |
Posted By: wekracer
Date Posted: 20 Dec 2018 at 5:39am
| We’re looking at mid 80s panther with an 855 Cummins. So it’s older than what most of you are running |
Posted By: Lonn
Date Posted: 20 Dec 2018 at 6:52am
|
Steiger was great until Case started tinkering with them. Parts are easy to come by and not super expensive and could get many parts at truck dealers. Can't say that for today's Steiger. ------------- -- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... - Wink I am a Russian Bot |
Posted By: Mike Kroupa
Date Posted: 20 Dec 2018 at 7:57am
| I have a 1982 PTA280 3406A powered, 750 series Allison 5 speed Trans,2 spd. drop box and RABA axles put the power to the ground. It's been one of the most trouble free tractors that I've owned. Updated the HVAC system with AP Air's, and now it cools like a new one. Ben @ Big Tractor Parts can get a lot of the parts, plus he's a great guy. Most consumable parts, u-joints, control cables, etc, can be sourced locally from NAPA, Inland Truck, etc. Good Luck, Mike |
Posted By: victoryallis
Date Posted: 21 Dec 2018 at 8:21pm
|
Hated my Steiger built tractor. Lost my butt on it. Brakes sucked and most of the time had to shut it off to shift. Lost my butt doing it but glad I sent it down the road. ------------- 8030 and 8050MFWD, 7580, 3 6080's, 160, 7060, 175, heirloom D17, Deere 8760 |
Posted By: wekracer
Date Posted: 26 Dec 2018 at 8:51pm
| Does anyone have any experience with the Steiger with the allis power director trans and axels. There is one close by with a 280 horse cat engine. |