Farm Equipment - WD45 and New Idea corn picker

Print Page | Close Window

WD45 and New Idea corn picker

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=152983
Printed Date: 27 Jul 2025 at 12:14pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WD45 and New Idea corn picker

Posted By: Rick143
Subject: WD45 and New Idea corn picker
Date Posted: 13 Aug 2018 at 12:27pm

I want to pull a new idea 310 one row picker behind my WD45. Has any one done this using an Allis single acting cylinder on it? The picker has two springs on it that look like they would assist in lowering the picker and holding it down. Any input would be greatly appreciated.

Replies:

Posted By: Ky.Allis
Date Posted: 13 Aug 2018 at 5:19pm

Should work fine. Old brochure I have on NI pickers shows the springs for use with a single acting cylinder.

Posted By: Rick143
Date Posted: 13 Aug 2018 at 7:42pm

Thanks I appreciate the input. I was wondering about the springs because I have two pickers one has them and the other one doesn't.

Posted By: Allis dave
Date Posted: 14 Aug 2018 at 6:54am

I would also think they'd be fine. I think Don(MO) has one and uses it.

Posted By: allisbred
Date Posted: 14 Aug 2018 at 8:18pm

I think it will work better. We use the NI 323 picker and the frame got broke with a 2 way behind the 185's. My father never broke one with a 45 and a one way cylinder. Only needs pressure up, float on down position. We still pick a lot of corn and have had several pickers over the years.