Farm Equipment - 82S sickle mower drive belt

Print Page | Close Window

82S sickle mower drive belt

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=151130
Printed Date: 07 Oct 2025 at 8:08am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 82S sickle mower drive belt

Posted By: Orange Glow
Subject: 82S sickle mower drive belt
Date Posted: 08 Jun 2018 at 9:16pm

I was mowing hay with my WD45 and 82S sickle mower today, and after the grass dried out nice, I had some good mowing on a sqare 5 acre patch. Until I burnt the front drive belt that is. It wasn’t in very good condition to begin with, but it is now stretched to where it’s too loose and too narrow. There isn’t any Agco dealers very close, so I’m going to take it to John
Deere and try to have them match it.
It is part number 804302. Does anyone know the dimensions so I have some more to go off? I have looked online, and it looks to be 7/8” by 61”. Does that sound right?
I appreciate any help, and thank you in advance!

Replies:

Posted By: Auntwayne
Date Posted: 08 Jun 2018 at 10:27pm

Don't go green, go to NAPA instead.

-------------
Dad always said," If you have one boy, you have a man. If you have two boys, you have two boys". "ALLIS EXPRESS"

Posted By: Mikez
Date Posted: 08 Jun 2018 at 10:32pm

Think I have a few NOS belts

Posted By: Gary
Date Posted: 09 Jun 2018 at 4:59am

Link to dimensions:

https://www.vbeltguys.com/products/804302-allis-chalmers-oem-equivalent-conventional-v-belt" rel="nofollow - https://www.vbeltguys.com/products/804302-allis-chalmers-oem-equivalent-conventional-v-belt