AQC WD Oil Filter Tube?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=150170
Printed Date: 19 Jul 2025 at 1:25am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: AQC WD Oil Filter Tube?
Posted By: Ken McGregor
Subject: AQC WD Oil Filter Tube?
Date Posted: 05 May 2018 at 7:45pm
Is there anyone else who has the tube for inserting into a WD oil filter? AGCO wants $47.00 CAD for this little item....surely there are cheaper versions of this item? regards, Ken McGregor |
Replies:
Posted By: Hubert (Ga)engine7
Date Posted: 05 May 2018 at 7:49pm
|
DJS Tractor Parts has them. http://stores.djstractorparts.com/allis-chalmers-wd-parts/" rel="nofollow - http://stores.djstractorparts.com/allis-chalmers-wd-parts/ ------------- Just an old country boy saved by the grace of God. |
Posted By: DiyDave
Date Posted: 05 May 2018 at 7:50pm
| Its just a tube, it can be made from scratch, from copper or steel tubing, as long as it fits into the filter base, and doesn't dent the top of the filter, when the filter is tightened. Also, Wisconsin engines also used this filter, so you might find one on a V2 or V4 Wisconsin engine... |
Posted By: Ted in NE-OH
Date Posted: 05 May 2018 at 9:07pm
|
Check Steiners Parts ------------- CA, WD, C, 3 Bs, 2 Gs, WC, I-400, 914 |
Posted By: Phil48ACWC
Date Posted: 07 May 2018 at 6:37am
|
https://www.ebay.com/itm/Allis-Chalmers-WD-WD45-Oil-Filter-Housing/202269646047?hash=item2f1835dcdf:g:pV4AAOSwh41atUYQ%20" rel="nofollow - https://www.ebay.com/itm/Allis-Chalmers-WD-WD45-Oil-Filter-Housing/202269646047?hash=item2f1835dcdf:g:pV4AAOSwh41atUYQ
Check above site.
|
Posted By: Sugarmaker
Date Posted: 07 May 2018 at 7:21am
|
Like Dave said they can be made. I used a piece of steel brake line, I put a screw in the top and a small hole below the screw for flow. Regards, Chris ------------- D17 1958 (NFE), WD45 1954 (NFE), WD 1952 (NFE), WD 1950 (WFE), Allis F-40 forklift, Allis CA, Allis D14, Ford Jubilee, Many IH Cub Cadets, 32 Ford Dump, 65 Comet. |
Posted By: chaskaduo
Date Posted: 07 May 2018 at 5:40pm
|
Rod (NH) has the dimensions and info here. ------------- 1938 B, 79 Dynamark 11/36 6spd, 95 Weed-Eater 16hp, 2010 Bolens 14hp |
Posted By: chaskaduo
Date Posted: 07 May 2018 at 5:41pm
|
Forgot the URL http://rodnh.byethost12.com/acb/filter%20tube/riser%20tube.htm?i=2" rel="nofollow - http://rodnh.byethost12.com/acb/filter%20tube/riser%20tube.htm?i=2 ------------- 1938 B, 79 Dynamark 11/36 6spd, 95 Weed-Eater 16hp, 2010 Bolens 14hp |
Posted By: Gary
Date Posted: 07 May 2018 at 6:57pm
|
Piece of 1/4" brake line tubing from NAPA, $1.59 per foot |