DJ'S A-C catalogue
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=149730
Printed Date: 07 May 2025 at 2:02pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: DJ'S A-C catalogue
Posted By: EPALLIS
Subject: DJ'S A-C catalogue
Date Posted: 22 Apr 2018 at 1:44am
| I received the 2018 Allis Chalmers parts catalogue from DJ's in the mail yesterday. Wow, this is really nice! Almost seems like they have more parts than AGCO. It's a must have.... |
Replies:
Posted By: Hubert (Ga)engine7
Date Posted: 22 Apr 2018 at 4:17am
|
X2 ------------- Just an old country boy saved by the grace of God. |
Posted By: PaulB
Date Posted: 22 Apr 2018 at 5:37am
|
Exactly the same as what Sandy Lake and Stieners sell, right down to the part numbers ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: AaronSEIA
Date Posted: 22 Apr 2018 at 11:12am
|
I bought all the parts I needed for my D17 engine swap from them. Great to work with and much cheaper shipping than Steiner. They actually travel to shows and support the hobby. AaronSEIA |
Posted By: FREEDGUY
Date Posted: 22 Apr 2018 at 7:13pm
We purchased a tach drive gear from him(48 tooth) and it required modification from a local machinist to fit in the housing. Have since seen the same drive on Steiners' site significantly cheaper. And yes,I did contact DJ about the issue (pertaining to the machining). Pretty sure this was an isolated occurance.
|
AaronSEIA wrote:Posted By: knkrein1
Date Posted: 22 Apr 2018 at 7:27pm
|
I get parts from DJ's - have been working on a CA this last winter. For me to get part I just drive to his place about 3 - 4 miles and pick them up saves on shipping time. ------------- Ken R. |
Posted By: Ryan T
Date Posted: 22 Apr 2018 at 7:30pm
| I’ve done a lot of business with them and been satisfied very much 👍👍👍 |
Posted By: Ranse
Date Posted: 22 Apr 2018 at 8:01pm
| I've got quite a bit of stuff from them. They do have about the same things as Steiner, but I like DJs web site better (easier to navigate for me). |
Posted By: oldways
Date Posted: 22 Apr 2018 at 8:52pm
|
2nd that Ranse ------------- 1 Corinthians 1:18 1969-190xt-III. 1966 190xt gas. 1966 190xt Cab. 1948-G. 1937-WC unstyled. 1950-B. 1951-CA. 1966-D17-IV |
Posted By: john(MI)
Date Posted: 22 Apr 2018 at 9:16pm
|
I recently bought all the parts I needed for my S14 seat from DJ's. I used the website. I would just as soon not get a catalog. If I need something I can go online to find it. I do appreciate them remembering I bought from them! ------------- D14, D17, 5020, 612H, CASE 446 |
Posted By: Dusty MI
Date Posted: 23 Apr 2018 at 7:28am
|
My daughter works at a place that does mass mailing. I got mine hand delivered. ------------- 917 H, '48 G, '65 D-10 series III "Allis Express" |
Posted By: dudley wallace
Date Posted: 23 Apr 2018 at 8:55am
|
is this a free catalogue like the stiener book if so how do I get one ------------- a member of hendricks county antique tractor and machinery association club. |
Posted By: FREEDGUY
Date Posted: 23 Apr 2018 at 7:09pm
Get online,look for a part that you need, order the part, then you will be in his system. Then you will receive the "catalog". "
|
Posted By: AaronSEIA
Date Posted: 23 Apr 2018 at 7:45pm
|
I think you can just request one as well. They hand them.out at the shows they attend. AaronSEIA |