190XT side shields
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=148957
Printed Date: 23 Aug 2025 at 1:12am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 190XT side shields
Posted By: ezlle71
Subject: 190XT side shields
Date Posted: 30 Mar 2018 at 10:33am
|
My tractor was missing both side shields when i bought it. they are the ones by the torque tube. If anybody has some they could get me the measurements of i would appreciate it. i was just gonna fab some up. thank you. ------------- 190XT, 185, D15 SII, 7040 is living again, 7010 retired for parts. |
Replies:
Posted By: calico190xt68
Date Posted: 30 Mar 2018 at 11:26am
|
Just to be clear, the early 190XTs had a one piece side shield that had both the front and the rear joined, but because you are only asking for the rear shield, you must want a later model 190XT measurement. Mine is the early 190XT, otherwise I would get you a measurement. I don't know for sure when it switched, but I think around 1970 or after. ------------- 80 7010, 80 7020. 67 190XTD Series I w/500 Loader, AC 2000 Plow, Member Indiana A-C Partners, Member TAC |
Posted By: Luke R.
Date Posted: 30 Mar 2018 at 12:28pm
|
I have new ones for the later models. 641-660- four one 50. $60 each ------------- 4-7030's,170G,220FWA,3-220's,210,D21II,D21I industrial,2-200's,3-190's,175D,2-D19D's,D19G,WD45,WD,CA,2-UCont.,5015FWA,917,B110,Gleaner F |
Posted By: CAL(KS)
Date Posted: 30 Mar 2018 at 12:34pm
|
Not sure where in KS you are but Abilene Machine should have a pile of them ------------- Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20 Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15 |
Posted By: ezlle71
Date Posted: 30 Mar 2018 at 3:57pm
I am just over east of Junction City. I called Abilene Machine and they said they would call me back. lol that was a month ago. guess i need to swing in there and see what they have. ------------- 190XT, 185, D15 SII, 7040 is living again, 7010 retired for parts. |
CAL(KS) wrote:Posted By: CAL(KS)
Date Posted: 30 Mar 2018 at 3:58pm
|
ha. im just west of JC. yes best bet is to go there after you call and have them take you to the building they are in and pick out a set.
------------- Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20 Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15 |
Posted By: ezlle71
Date Posted: 30 Mar 2018 at 3:59pm
mine is a 68 and it has the shorter rear side panels. ------------- 190XT, 185, D15 SII, 7040 is living again, 7010 retired for parts. |
Posted By: ezlle71
Date Posted: 30 Mar 2018 at 3:59pm
yea i think my brother in law knows you. south of chapman right? ------------- 190XT, 185, D15 SII, 7040 is living again, 7010 retired for parts. |
Posted By: Charlie175
Date Posted: 01 Apr 2018 at 1:59pm
|
Lukes will fit, that is where I got mine. 1968 model ------------- Charlie '48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |