mice!!!! causing clucth problems
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Shops, Barns, Varmints, and Trucks
Forum Description: anything you want to talk about except politics
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=148888
Printed Date: 23 May 2024 at 9:01pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: mice!!!! causing clucth problems
Posted By: steve fischer
Subject: mice!!!! causing clucth problems
Date Posted: 28 Mar 2018 at 9:10am
| I have had two d17 tractors come in my shop for foot clutch problems pulled both apart and found mouse nests , wow , gets in p/ plate so bad they do not release , anyone else is this ,not fun to work on smells bad |
Replies:
Posted By: Dakota Dave
Date Posted: 28 Mar 2018 at 9:19am
| Nope I gots Cats. I sometimes get mad at them for leaving paw prints all over my freshly washed windshields and knocking stuff of the shelves in the tractor shed. But I haven't had mouse chewed interiors in a long time. there is usually a cat sleeping in the tractor seat that needs evicting before I can take the tractor out. |
Posted By: steve fischer
Date Posted: 28 Mar 2018 at 9:24am
| I have cats to, these tractors are customers, should I be putting something in bell housing |
Posted By: jaybmiller
Date Posted: 28 Mar 2018 at 9:25am
|
When I bought my first D-14, Troy, in 2000..the bell housing was FULL of 'mouse house'. I mean JAMMED packed !! The starter was so full it wouldn't spin by hand !!! I'm thinking the missing bottom, circular cover plate 'might' have had something to do with it..... get a LOT of mouse traps and make them more inviting than you tractors. I hear Bounce sheets are good mouse repellants,can you stick a few in there? ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: Dakota Dave
Date Posted: 28 Mar 2018 at 10:47am
| The mice nested in the box of bounce sheets in my camper. Moth balls didn't work. Those electronic pest repellents didn't work. If your customers tractor comes in full of mouse house nothing you do at your shop is going to help. If used Tom Cat bait stations it kills them then you windup finding dead mice in the hardest place to remove them from. Lots of mouse traps or cats are them only way. At the farm we put several traps in each piece of equipment in the fall when we store them. One of the other guys spread an hour every day emptying and resetting traps. The farm cats can't get in the tractors,trucks or combines so the mice get in to hide. It usually takes a month of trapping mice every day till we don't catch any more. Since doing that we haven't had to rewrre or recover any seats. |
Posted By: mdm1
Date Posted: 28 Mar 2018 at 4:00pm
|
Had that happen to a truck one time. My insurance covered the replace under comp! ------------- Everything is impossible until someone does it! WD45-trip loader 1947 c w/woods belly mower, 1939 B, #3 sickle mower 1944 B, 2 1948 G's. Misc other equipment that my wife calls JUNK! |
Posted By: ac fleet
Date Posted: 28 Mar 2018 at 4:05pm
|
Got a 96 F-150 here right now with same problem.--Still can't see where they got in!--Did it in early Dec. last year, --truck still not fixed! thanks; ac fleet |
Posted By: mdm1
Date Posted: 28 Mar 2018 at 4:57pm
|
mine was a Ford Ranger and there was a small inspection hole where they got in. ------------- Everything is impossible until someone does it! WD45-trip loader 1947 c w/woods belly mower, 1939 B, #3 sickle mower 1944 B, 2 1948 G's. Misc other equipment that my wife calls JUNK! |
Posted By: SLB
Date Posted: 28 Mar 2018 at 6:26pm
| My son left for the Air Force last summer. Moved his Ranger yesterday and discovered a smell when I turned on the blower. Found a nest pooled with urine and what not under the air filter...... |
Posted By: DiyDave
Date Posted: 28 Mar 2018 at 6:33pm
And it seems like mouse whizz is a better corrosive, than battry acid! Instant rust, where it hits! One time I was splittin a MF turf 20, that hadda tranny input seal leakin. Hadn't been run in a while, and them stingin bumbly bees had moved into the mouse nest, only found them, when I split her!
|
Posted By: KJCHRIS
Date Posted: 28 Mar 2018 at 9:38pm
|
They also like to go thru the 2 clutch housing vents in top of housing. About 3/4" x 1 1/2" holes just above flywheel, I use a bit of steel wool held in with super glue to plug them when fixing the starter or clutch problems. ------------- AC 200, CAH, AC185D bareback, AC 180D bareback, D17 III, WF. D17 Blackbar grill, NF. D15 SFW. Case 1175 CAH, Bobcat 543B, |
Posted By: Ted J
Date Posted: 31 Mar 2018 at 10:08pm
Give em a key hole and,,,,,,,,,,,,,,,,,,,,,,,,,,
------------- "Allis-Express" 19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17 |
Dakota Dave wrote: