Farm Equipment - Will a D17 SIV run a hydraulic motor

Print Page | Close Window

Will a D17 SIV run a hydraulic motor

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=148116
Printed Date: 23 Oct 2025 at 3:12pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Will a D17 SIV run a hydraulic motor

Posted By: Eldon (WA)
Subject: Will a D17 SIV run a hydraulic motor
Date Posted: 02 Mar 2018 at 10:10pm

Just wondering if it has good enough hydraulics to run a motor that runs a conveyor on a hay grinder/feeder cart? It is one of these chop as you feed rigs.

-------------
ALLIS EXPRESS!
This year:

Replies:

Posted By: DougS
Date Posted: 03 Mar 2018 at 5:34am

Do the specs say how many GPM are needed?

Posted By: DrAllis
Date Posted: 03 Mar 2018 at 6:39am

Your pressures are probably OK at 2,200 psi. If the gallons are too low, it will just run slow. Extended use would heat the hyd oil, but I doubt this would be extended use ??