314H (new to me)
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=147886
Printed Date: 31 Oct 2024 at 6:16pm Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 314H (new to me)
Posted By: Hubnut
Subject: 314H (new to me)
Date Posted: 24 Feb 2018 at 11:53am
Well, I finally bought a garden tractor. I bought a 314H that hasn't run in 20 years. I got the tractor and a complete EZ Vac system for it for $550. I know it's a risk buying it without hearing it run and the HST is a concern, but I thought, what the heck. It appears well maintained and it was all kept inside all this time. My first problem is that I can't get it to roll. Doesn't matter where I put the selector. I hope this isn't a bad sign. I will be asking for help in the near future. I'm new to these beasts! Steve
------------- 1940 B "Lucy" 1941 B w/ Woods L59 "Flavia" 1942 B w/ finish mower "Dick" 1941 C w/ 3-point "Maggie" 1947 C SFW w/ L306 "Trixie" 1972 314H
|
Replies:
Posted By: littlemarv
Date Posted: 24 Feb 2018 at 2:42pm
There should be a hydro disengage lever on the back, right side.
------------- The mechanic always wins.
B91131, WC23065, WD89101, CA29479, B1, Early B10, HB212, 416H
|
Posted By: LeonR2013
Date Posted: 24 Feb 2018 at 4:36pm
If parked with brake on it could be stuck.
|
Posted By: ACmowerguy
Date Posted: 24 Feb 2018 at 4:52pm
Nice looking 314. Yes it should not roll unless the lever that Marv mentioned is released. Then it should freewheel with ease.
------------- 10 various B-series garden tractors, AC Homesteader8, 416 hydro,710 gt, 914, 916H, 917H, 920D, and many misc attachments
|
Posted By: Hubnut
Date Posted: 24 Feb 2018 at 6:49pm
littlemarv wrote:
There should be a hydro disengage lever on the back, right side. |
Thank you littlemarv! I flipped the lever and it rolls easily now. I hope I didn't damage it winching it onto and off my trailer.
------------- 1940 B "Lucy" 1941 B w/ Woods L59 "Flavia" 1942 B w/ finish mower "Dick" 1941 C w/ 3-point "Maggie" 1947 C SFW w/ L306 "Trixie" 1972 314H
|
Posted By: Hubnut
Date Posted: 24 Feb 2018 at 6:50pm
ACmowerguy wrote:
Nice looking 314. Yes it should not roll unless the lever that Marv mentioned is released. Then it should freewheel with ease. |
Thank you. I think it's in nice shape for it's age. Not abused at all.
------------- 1940 B "Lucy" 1941 B w/ Woods L59 "Flavia" 1942 B w/ finish mower "Dick" 1941 C w/ 3-point "Maggie" 1947 C SFW w/ L306 "Trixie" 1972 314H
|
Posted By: talntedmrgreen
Date Posted: 25 Feb 2018 at 8:25pm
Very nice!
------------- Patterson B1*B1/B1Forklift*B10*BigTen/B1Loader*B110*B208*B206*616*Homelite T16H/T8/T7/RM7E*Landlord/Loader/Trencher*Broadmoor717*Serf525*2110*7790*Legacy XL*Twin 20*Squire9*Squire6*JCPenny 494
|
Posted By: ac720nut
Date Posted: 27 Feb 2018 at 4:12am
Very nice find, doubt it will take much to get it running
|
Posted By: Hubnut
Date Posted: 27 Feb 2018 at 8:17pm
Worked on the 314. The intake valve was stuck open. I hit it with Kroil and worked it gently. It finally freed up after about 3 hours. Carb was a mess, cleaned it and got it adjusted. The fuel pump was clogged. After all that, I was able to get her fired up. I think the fuel is still not reaching the cylinders because I have to goose it with ether to start it. It drives great and mows great too. Lift works, lights work, cigarette lighter is missing (drat!). I really like this thing. I plan on cleaning her up this weekend and getting things sorted.
------------- 1940 B "Lucy" 1941 B w/ Woods L59 "Flavia" 1942 B w/ finish mower "Dick" 1941 C w/ 3-point "Maggie" 1947 C SFW w/ L306 "Trixie" 1972 314H
|
Posted By: Brian F(IL)
Date Posted: 01 Mar 2018 at 12:56pm
I mowed a lot of grass with one like that back in the early 70's. It did a nice job of mowing. Wished it had power steering but it wasn't too bad. Hydrostatic was nice.
|
Posted By: Hubnut
Date Posted: 04 Mar 2018 at 7:14am
Got it running well, but it's puking oil out of the valve cover. I guess I've got major blow by. Dang. I was hoping I got a gem, but it's a turd. Need an engine rebuild.
------------- 1940 B "Lucy" 1941 B w/ Woods L59 "Flavia" 1942 B w/ finish mower "Dick" 1941 C w/ 3-point "Maggie" 1947 C SFW w/ L306 "Trixie" 1972 314H
|
|