7060 PS Brakes
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=144871
Printed Date: 03 Nov 2025 at 11:40pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 7060 PS Brakes
Posted By: AC_Farmer
Subject: 7060 PS Brakes
Date Posted: 28 Nov 2017 at 8:22am
| I have a AC 7060 powershift with brake problems. Last year the high range gear seized onto the shaft. Split the tractor, tore down the rear end to replace the high range gears and shaft. After getting it back together and using it for a couple of hours I still don’t have pressure to the brake pedals. Is there air in the lines? Something else? I have learned a lot from searching this forum. Thank you for sharing your expertise! |
Replies:
Posted By: DrAllis
Date Posted: 28 Nov 2017 at 8:30am
| Pressure for the brakes comes from the diff lock valve tee on the top. Do all other hydraulic functions work ???????????????????? If so, I'd suspect the inlet fitting (orifice) on the brake valve is plugged with a spec of debris. |
Posted By: AC_Farmer
Date Posted: 28 Nov 2017 at 8:33am
| DrAllis - thanks for the quick reply! Yes, all other hydraulic functions work as they should. I’ll check the brake valve inlet fitting... |
Posted By: LB0442
Date Posted: 28 Nov 2017 at 9:33am
I resealed one a while ago that was leaking down the pedals. The pressure line in has a check ball in it, could be froze or have trash in it. It is really easy to reseal the unit and surprisingly it made a big difference on how the brakes work. Gave it a lot more solid pedal.  |