Allis D17 Loaders
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=144060
Printed Date: 01 Jul 2025 at 2:57pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Allis D17 Loaders
Posted By: southwindson
Subject: Allis D17 Loaders
Date Posted: 02 Nov 2017 at 3:48pm
|
I would like to have help in creating a list of loaders that will fit the Allis Chalmers D17 series IV. I'm hoping that some of you out there can chime in and let me know what is right and what is wrong because I am not an expert. From what I have seen as the normal loaders on the D17 these may work. Loaders for D17 series IV: 1. Allis Chalmers 400 & 500 series loaders (414,415,417,460,500,517 & 519) 2. Allis Chalmers Industrial loaders (L-99 & L200) 3. Great Bend 800 loader 4. Westendorf Loaders (WL-21 & WL-42) 5. Kelley loaders 6. Farmhand F11 loader 7. Davis 101B loader 8. Koyker K5 Loader 9. Paulson loaders 10. American loaders 11. Dual (125 & 320) 12. Schwartz 1400 loader 13. Trip conversions (AC 170 & Freeman) My hope is that others can add to these and confirm that these loaders will work for the Allis D17.
|
Replies:
Posted By: Clay
Date Posted: 04 Nov 2017 at 12:06pm
|
Our D17 Series II has a 500 loader. It was installed by the dealer in 1970. The pump is front mounted. Shims were added between the loader frame and the tractor frame. The D17 is a little narrower than the loader. This is a great tractor/loader combination. |
Posted By: polarbear
Date Posted: 04 Nov 2017 at 4:20pm
| allied 590 fits on d-17 and d-19 |
Posted By: LaJaMe
Date Posted: 04 Nov 2017 at 6:10pm
| L200 Indusrtial w/ front pump Not one to go off and on but very strong |
Posted By: john(MI)
Date Posted: 04 Nov 2017 at 7:47pm
Torch and welder can make lots of things fit!  ------------- D14, D17, 5020, 612H, CASE 446 |
Posted By: southwindson
Date Posted: 04 Nov 2017 at 9:44pm
| I would prefer not having to use a torch and welder. |
Posted By: Travis2766
Date Posted: 04 Nov 2017 at 10:32pm
|
I have a New Idea loader on mine. I believe it’s a model 504. I also think I have seen some with a Freeman loader. ------------- 190XT Series III, D17 Series IV, D15 Series II, All Crop 66 and a whole mess of equipment. |
Posted By: cwhit
Date Posted: 05 Nov 2017 at 7:05am
| Bush-hog makes one. Don’t remember the model number |