plow bolt size?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=143036
Printed Date: 19 Jul 2025 at 12:14pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: plow bolt size?
Posted By: rustyorange45
Subject: plow bolt size?
Date Posted: 01 Oct 2017 at 7:33pm
|
I am wanting to flip the cutting edge on my Oxnard rear blade and was wanting to know if anyone had a source for the 5/8" plow bolts (5/8-11x2") used to fasten the cutting edge to the moldboard. I also wanted to know if anyone knows a source for a replacement cutting edge. Thanks, Tim ------------- 1953 WD45 WF/Model 90 Loader, Oxnard Rear Blade, 80R Mower, Model 209 Disc, WD Rear Mounted Scoop, Model 184 & 160 Rotary Mowers, 1952 CA NF/L306CA mower, 1953 CA WF/Model 8 Loader. |
Replies:
Posted By: DiyDave
Date Posted: 01 Oct 2017 at 7:59pm
|
As for the bolts, A lot of graders use the same size, 5/8 by X. Pretty sure fastenall will have them, as well as equipment dealers... Blade will be a more difficult score...
 |
Posted By: truckerfarmer
Date Posted: 01 Oct 2017 at 8:27pm
|
If they are standard plow bolts, most any farm supply store should have them. ------------- Looking at the past to see the future. '53 WD, '53 WD45, WD snap coupler field cultivator, #53 plow,'53 HD5B dozer Duct tape.... Can't fix stupidity. But will muffle the sound of it! |
Posted By: SteveMaskey(MO)
Date Posted: 01 Oct 2017 at 8:32pm
| I think there was a post a few years ago about using some Caterpillar cutting edges that were almost a direct replacement and wasn’t overly expensive. Maybe someone will chime in |
Posted By: jiminnd
Date Posted: 01 Oct 2017 at 9:06pm
|
I looked at mine and don't think it can be flipped, bolt pattern won't match. ------------- 1945 C, 1949 WF and WD, 1981 185, 1982 8030, unknown D14(nonrunner) |
Posted By: TBone
Date Posted: 02 Oct 2017 at 7:48am
|
Got mine from Farm & Fleet |
Posted By: Gerald J.
Date Posted: 02 Oct 2017 at 9:34am
|
Shoup says they have 5/8" plow bolts in stock, a whole buck each. https://www.shoupparts.com/PB58214/" rel="nofollow - https://www.shoupparts.com/PB58214/ Gerald J. |