Print Page | Close Window

D-17 Seal

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=142909
Printed Date: 23 Sep 2025 at 3:21am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: D-17 Seal
Posted By: Dave76
Subject: D-17 Seal
Date Posted: 27 Sep 2017 at 8:51pm
I have the motor out of my D17 series 3 and was going to put in new seals on the trans input-clutch shaft. There are two seals in housing, I took the seals to town and they crossed the seal to a CR number but the original seal is real heavy duty and the new seal is just one little rubber lip, was wondering if anyone has used the lighter seal.



Replies:
Posted By: MACK
Date Posted: 27 Sep 2017 at 9:39pm
New seals may be better material than old ones.     MACK


Posted By: tadams(OH)
Date Posted: 28 Sep 2017 at 2:29pm
If your worried you could put two seal back in



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net