Construction and other equipment

Print Page | Close Window

653 Final drive

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=142630
Printed Date: 19 Jul 2025 at 7:32pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 653 Final drive

Posted By: sparkchaser221
Subject: 653 Final drive
Date Posted: 19 Sep 2017 at 9:13am

Allis Chalmers 653. My right side final drive housing cracked and took out the pinon gear. Does anybody know where I can get a final drive housing or a carriage assembly? I am located in Georgia. I also am looking for a pinon gear.

650, 653, 655

Replies:

Posted By: JoeO(CMO)
Date Posted: 19 Sep 2017 at 9:34am

This is on ebay now, located Century, AL

http://www.ebay.com/itm/Allis-Chalmers-653-Bull-Dozer/162673712298?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2055119.m1438.l2649" rel="nofollow - ( 162673712298 )

-------------

Posted By: Big Jim
Date Posted: 19 Sep 2017 at 9:38pm

I have a case setting in my shop. I can probably help with ever thing you need.

Posted By: JohnCO
Date Posted: 19 Sep 2017 at 9:47pm

That one on Ebay looks pretty good if you have the parts to fix it.

I see someone paid $3,450 for that Ebay one. Nearly a grand more then I paid for one that runs!

-------------
"If at first you don't succeed, get a bigger hammer"
Allis Express participant

Posted By: pinball
Date Posted: 20 Sep 2017 at 6:37am

Do a search on the internet. that's how I found mine fOR my H4 which I think is the same. Get your pocket book ready. Don't be alarmed when you find one cause there definetly proud of them,

Posted By: Coke-in-MN
Date Posted: 20 Sep 2017 at 8:37am

Watch the outboard bearing casting machining for bearing - that area is a weak spot in case and many have been repaired satisfactorily - but lot of cases with damage are still out there - and for that gear - bring lots of money as it's expensive - just like axles and the drive gear. been there / done that .

Had both cases machined to accept a steel insert to hold the Timkin bearing cup for the axle . went through 4 axles on my machines before it got traded in .

-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."

Posted By: 363ford
Date Posted: 28 Oct 2017 at 7:06pm

Big Jim I sent you a message

Posted By: Coke-in-MN
Date Posted: 30 Oct 2017 at 3:50pm

It can be repaired by a good machine shop that specializes on heavy repair - I had a truck machine shop that does large transmissions and rear truck axles do mine on the HD4 as well as reinforce the ones on my FD5

-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."