Farm Equipment - 6080 rebuild

Print Page | Close Window

6080 rebuild

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=140698
Printed Date: 31 Dec 2025 at 5:41pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 6080 rebuild

Posted By: G3farms
Subject: 6080 rebuild
Date Posted: 22 Jul 2017 at 8:36pm

I am about to rebuild my 6080 motor with just an in frame kit.

Question is.........who makes a good dependable after market rebuild kit?

I doubt I could afford one from Agco.

Are the rebuild kits from A & I any good?

Thanks,
George

-------------
Proud owner of one of the very last 6080 tractors, serial no. 7711, yep it is correct!

Replies:

Posted By: Gary(WI)
Date Posted: 22 Jul 2017 at 8:56pm

Reliance makes a kit They have good parts I am a reliance dealer if you need a price

Posted By: G3farms
Date Posted: 23 Jul 2017 at 7:31am

Sure, give me a price on one.

Would like a kit that has liners and pistons, main and rod bearings and gasket set.

Have not gotten far enough into the tear down to see if standard or oversize bearings yet.

Need to get the head looked at also to see that it is not cracked or warped.

-------------
Proud owner of one of the very last 6080 tractors, serial no. 7711, yep it is correct!

Posted By: Gary(WI)
Date Posted: 23 Jul 2017 at 8:25am

PM sent

Posted By: wekracer
Date Posted: 23 Jul 2017 at 8:11pm

We priced an agco kit for the F2 from minpar last year for $900. It was all agco parts. Should be the same kit. Not to tell you what to do and I don't know the hours but I would pull the engine and put cam bearings and main seals in while your at it. Good luck