Farm Equipment - Supplier for Ross Steering Box Parts

Print Page | Close Window

Supplier for Ross Steering Box Parts

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=140284
Printed Date: 05 Oct 2025 at 2:22pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Supplier for Ross Steering Box Parts

Posted By: AJ
Subject: Supplier for Ross Steering Box Parts
Date Posted: 10 Jul 2017 at 8:11am

Is there a company who still makes/sells the Ross steering box seals/parts?

-------------
Can't fix stupid

Replies:

Posted By: Tracy Martin TN
Date Posted: 10 Jul 2017 at 10:39am

Ross Gear -TRW is still in business. Lebanon, TN. HTH

-------------
No greater gift than healthy grandkids!

Posted By: corbinstein
Date Posted: 11 Jul 2017 at 6:57am

Now that's interesting.......

Ross put steering gearboxes in Studebakers too.

Posted By: corbinstein
Date Posted: 11 Jul 2017 at 6:58am

What's wrong with the one you have? I know of a couple tricks if the case isn't busted.

Posted By: wbecker
Date Posted: 11 Jul 2017 at 8:15am

You can get the bushings and seal at a bearing supply.
Seiner Tractor, and others have aftermarket lever shaft, or you can install a new "Pin" in the old lever shaft.
I have never found a source for a new worm shaft.
Bill B

-------------
Allis B, IB, Low B, G, D10, JD M, 8KCAB, C152