8030 "slipping"
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=139841
Printed Date: 29 Dec 2025 at 7:28pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 8030 "slipping"
Posted By: JVan93
Subject: 8030 "slipping"
Date Posted: 27 Jun 2017 at 9:35am
|
Last night I hooked up the 8030 to the round baler for the 1st time and after a bit when I got into the double rows the tractor started to act like a clutch or something was slipping. the engine rpms stayed up but the darn thing just slowed down both the forward motion of the tractor and the PTO. I would step on the clutch pedal and let the pto wind back up and then I'd take of and no issues for a few bales then it would do it again. Also when I'd get into a lighter windrow and want to shift the PD up into high it would take a bit to shift up. Any suggestion? Thanks
|
Replies:
Posted By: DennisA (IL)
Date Posted: 27 Jun 2017 at 9:54am
Sounds like you have some leaky seals in the PD. Time to get the PD rebuilt. We had to rebuild the PD in our 8030 this year.
Don't put it off to long. The longer you wait the more damaged can be done and the more it will cost.
-------------
Thanks & God Bless
Dennis
|
Posted By: CAL(KS)
Date Posted: 27 Jun 2017 at 10:07am
sounds like slipping torque limiter since the pto is also slowing down
-------------
Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20
Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15
|
Posted By: DrAllis
Date Posted: 27 Jun 2017 at 10:45am
|
Look at the hole in the bottom of the bell housing and I'll bet there's an oil leak inside getting on the torque limiter.
|
|