Farm Equipment - 7060 Powershift issue

Print Page | Close Window

7060 Powershift issue

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=138885
Printed Date: 29 Dec 2025 at 6:32am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 7060 Powershift issue

Posted By: AC 426 power
Subject: 7060 Powershift issue
Date Posted: 29 May 2017 at 5:19pm

Got a moron belly 7060 with a powershift and today while pulling a a JD 220 disk the tractor would not move in 1st gear high range. I was pulling into the field for the first time after about a 13 mile trip on the road and was unfolding the disk when I noticed it. Had foot on clutch and released it and it would inch forward a bit and stop. Put it into second and it moved fine. Power shifted it back in 1st and it moved as normal. Stopped tractor and put it in 2nd again and back to first and it took off as normal in first gear. Oil level is normal, the only other thing I have noticed is the floor broad seems to be warmer this planting season then I can remember, can feel my feet getting warmer. Any ideas?

Replies:

Posted By: rw
Date Posted: 29 May 2017 at 8:42pm

some times the shifter kind of lands between two gears and you get no movement.

Posted By: MACK
Date Posted: 29 May 2017 at 9:31pm

If shifter don't feel normal shifting between gears, the spring or linkage could have broken on inside of valve body. MACK