Print Page | Close Window

190 loader mounts. ?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=138775
Printed Date: 29 Dec 2025 at 12:14pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: 190 loader mounts. ?
Posted By: Dakota Dave
Subject: 190 loader mounts. ?
Date Posted: 25 May 2017 at 5:58pm
any one have a Du All 300  loader on a 190 ?
Id like to see pictures if you do.
Thanks Dave



Replies:
Posted By: lentsch
Date Posted: 25 May 2017 at 9:18pm
I currently have my loader off my 190. What can I help you with?

-------------
WD,D15,190XT,7000,8010x2,7060,8070


Posted By: jiminnd
Date Posted: 25 May 2017 at 9:35pm
If you truly have a 300 loader I don't think it will fit a 190 without a few modifications.

-------------
1945 C, 1949 WF and WD, 1981 185, 1982 8030, unknown D14(nonrunner)


Posted By: lentsch
Date Posted: 25 May 2017 at 9:52pm
Not sure if mine is a 300 but the tubes going to the rear axle were modified when I bought it. They were either lengthened or shortened and that appears to be the only modification to the loader. I will check the model number tomorrow.

-------------
WD,D15,190XT,7000,8010x2,7060,8070


Posted By: Dakota Dave
Date Posted: 26 May 2017 at 6:20am
I don't have the tubes going to the rear axle. It's suppose to fit 50 to 100 hp tractors. I assume I'll need to make my own tube but I don't know exactly what they should look like. From what I see it mount with tubes going to the rear axle and has angle braces going foward to the engine area. I stopped this morning and looked at a local IH 866 with what I thought was a 300 on it the tubes going back to the axle and the cross support are one piece on it.  so I stopped at the JD dealer and an older JD has a 340 loader and the rear support tubes are seperate pieces with braces welded up to the engine belhousing bolts. I didnt pay much attentuion when I wqas at the farm this week there are two IH 986's with 325 loaders on them an I think the rear support and cross support were on piece also.  


Posted By: lentsch
Date Posted: 28 May 2017 at 8:09pm
Hey Dave- I found the model number on my loader. It is a 3000 and its for sale. If pictures will help let me know. It may be similar to a 300, I am not familiar with that loader.

-------------
WD,D15,190XT,7000,8010x2,7060,8070


Posted By: Dakota Dave
Date Posted: 28 May 2017 at 11:04pm
Thanks a 300 is the generation before the 3000. It's a universial pin on loader that fits 50 to 100 hp tractors. I looked at several tractors locally and will fab a mount. There are almost no AC tractors here. Case IH and John Deere. Your 3000 should be a quick mount. I'd like to see a picture of the tractor side mounts if you've got one. Even if the mount isn't on a tractor.


Posted By: gerkendave
Date Posted: 29 May 2017 at 6:33am
I have a 325 that I have done extensive modifications to to make it fit my XT like I wanted. I have a full set of custom mounts that consist of four separate pieces plus the angle braces from factory. I also have shortened the loader arms to locate the loader as close to the tractor as possible. If you would like some pictures I can email or text them to you.


Posted By: Dakota Dave
Date Posted: 29 May 2017 at 7:43am
I would love some pictures email to sodermand@polarcomm.com.
Thanks



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net