Joystick Install with Pictures
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=138644
Printed Date: 02 May 2025 at 6:05pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Joystick Install with Pictures
Posted By: TimZ(TX)
Subject: Joystick Install with Pictures
Date Posted: 21 May 2017 at 10:34pm
    ------------- 2-B's,CA,D15,D17,160,2-185's 8010 |
Replies:
Posted By: TimZ(TX)
Date Posted: 21 May 2017 at 10:38pm
|
It's probably never happened here before but this project went over budget and twice as long. Loader works great and is nice to free up the rear outlets. Went ahead and replaced all the lines on the loader. The seat is next. Tim ------------- 2-B's,CA,D15,D17,160,2-185's 8010 |
Posted By: shameless dude
Date Posted: 22 May 2017 at 2:50am
| nice job! |
Posted By: Tracy Martin TN
Date Posted: 22 May 2017 at 8:44am
|
Very nice looking job! Thanks for the pics! Tracy ------------- No greater gift than healthy grandkids! |
Posted By: shameless dude
Date Posted: 22 May 2017 at 8:45am
| will you hafta take it all apart now, when you go to paint the tractor? lol |
Posted By: JoeO(CMO)
Date Posted: 22 May 2017 at 9:07am
|
oh, I see!
 ------------- |
Posted By: Ron(AB)
Date Posted: 22 May 2017 at 1:22pm
|
Could the drain plug "T" be turned downward making it easier to drain? (easier to hit a pail) |
Posted By: Joe(TX)
Date Posted: 22 May 2017 at 7:49pm
|
I rigged my return to go through the filter by putting a tee fitting in the lift valve return line. ------------- 1970 190XT, 1973 200, 1962 D-19 Diesel, 1979 7010, 1957 WD45, 1950 WD, 1961 D17, Speed Patrol, D14, All crop 66 big bin, 180 diesel, 1970 170 diesel, FP80 forklift. Gleaner A |
Posted By: TimZ(TX)
Date Posted: 23 May 2017 at 7:58am
|
I tried the tee down, but it lowered the clearance an inch and a half. We use the tractor every once and awhile to clear brush. Just thought tucking it higher would be safer. Tim ------------- 2-B's,CA,D15,D17,160,2-185's 8010 |
Posted By: DMiller
Date Posted: 29 May 2019 at 7:13pm
On my 180 I split the joint connection under the floor next to the battery box and plumbed to the spool and back to the steel tube. Works like a champ.
|