Farm Equipment - Newbie w/ 8050 fuse panel ?

Print Page | Close Window

Newbie w/ 8050 fuse panel ?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=138156
Printed Date: 27 Dec 2025 at 12:29pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Newbie w/ 8050 fuse panel ?

Posted By: Kabong57
Subject: Newbie w/ 8050 fuse panel ?
Date Posted: 06 May 2017 at 9:17pm

New to the board and and just purchased my first Allis. Trying to trouble shoot the turn signals / 4 way flashers and can not find the fuse box. Owners manual and IT Shop Manual shows it beneath the steering column. All I find is the main circuit breakers and 7 (seven) other circuit breakers. No labeling or diagrams to show what they are for. Did Allis make a running change or did some one rewire this on their own?

Replies:

Posted By: Ron(AB)
Date Posted: 06 May 2017 at 10:17pm

Normal. Mine is the same. See the owners manual. It should have a diagram.

Posted By: Lynn Marshall
Date Posted: 07 May 2017 at 7:37am

Welcome to the forum. Early tractors did use fuses,later tractors had circuit breakers. The turn signal switch is usually the problem. A small change in the wiring may have to be done with a new switch.

Posted By: Kabong57
Date Posted: 07 May 2017 at 10:57am

Is there a kit or a wiring diagram to use the "new" style switch? I have most terminals and tools needed .

Posted By: Ron(AB)
Date Posted: 07 May 2017 at 2:07pm

Agco sells a replacement switch.

The originals were prone to failure. Most have been changed already so likely yours needs one too.

Just make sure all the bulbs are good and if it still does not seem to work… go shopping.