Farm Equipment - C Pedestal Stud, etc.

Print Page | Close Window

C Pedestal Stud, etc.

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=137935
Printed Date: 28 Aug 2025 at 12:22pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: C Pedestal Stud, etc.

Posted By: Runamuck
Subject: C Pedestal Stud, etc.
Date Posted: 30 Apr 2017 at 12:07pm

Been working on my '41 C alternator and removed the fan pulley to free up adjustment to get belt to fit. One of the studs that hold the front pedestal to the engine block has been broken off since before I owned it. Does anyone know where I can find a stud and the part number? Also may as well replace valve cover and oil pan gaskets that are leaking, and radiator hoses. Is there one place that has all this? Haven't been able to find anything on the stud. Also need governor spring for '48 C.

Thanks, Bill.

Replies:

Posted By: Dick L
Date Posted: 30 Apr 2017 at 1:14pm

You can use a 1/2" grade 5 or 8 bolt. The studs are 1/2" curse thread into the block with 1/2" fine thread on the outside.

Posted By: Runamuck
Date Posted: 30 Apr 2017 at 1:39pm

Thanks, Dick. That should work, I guess. Didn't even think about that!

Posted By: Nathan (SD)
Date Posted: 01 May 2017 at 4:29pm

Rear axle stud from a truck works too.

Posted By: Lon(MN)
Date Posted: 02 May 2017 at 7:18am

Got it all including the special nut on the stud.